1.停車場劃線施工前要結合實際地形結構,統計車輛預留車庫數量做好準備工作,線形流暢,開線要準,路面要干燥,除凈灰塵、雜物等。http://www.hxjzazgc.com 濟南車庫劃線 1 parking crossed before construction should be combined with the actual terrain structure, statistical vehicle reservation garage quantity prepare, streamline, line to be accurate, the pavement to dry, in addition to dust and sundries. 2.停車場劃線涂料在釜內加熱時,溫度應控制在180℃~220℃,同時充分?jǐn)嚢?涂料完全熔化后,保溫攪拌5分鐘,即可進行施工。 2 parking marking coating is heated in a kettle, temperature should be controlled at 180 DEG ~220 DEG, and fully mixing, coating completely after melting, heat preservation stirring for 5 minutes, can carry out construction. 3.非同類涂料不得混合,需將釜內清理干凈后才能換用另一種涂料待下涂劑完全干燥后劃線,水泥路面和老化、板結的瀝青路面噴涂一遍后需噴涂第二遍。http://www.hxjzazgc.com 3 non similar coating shall not be required to be mixed, kettle after cleaning, can be replaced with another kind of paint to dry completely pigmentum after marking, asphalt pavement cement concrete pavement and aging, hardening spraying again after spraying second times 4.氣溫過低和路面潮濕時不宜施工,隨時檢查施工作業,如標線厚度、外觀等是否符合要求,堅持做施工記。
