国产三级伦理在线,久久久久黄久久免费漫画,成人国产精品日本在线,欧美美最猛性xxxxxx

IDR22傳感器-美國Omega原裝詳細介紹

IDR22

iSeries PID控制器和信號調節器
iDR Series
5年保修 新產品! CE
iSeries PID控制器和信號調節器
iDR Series:iSeries PID控制器和信號調節器

IDR
通用輸入
熱電偶
- RTD
過程電壓
過程的電流
應變
多輸出
以太網TCP / IP
串行RS232／RS485
-自調整PID控制
2形式的“C”繼電器
2直流脈沖
可編程：
可擴展的模擬電壓，0至10伏直流電；
模擬電流，0至20毫安
高精度：±0.5°C（0.9°F），0.03%為
全自動調諧PID控制
用戶友好，簡單的配置
內置的激勵
插頭連接器
免費軟件

歐米茄?IDR DIN導軌系列是一個家庭的基于微處理器的儀器提供3種尺寸。該儀器有一個類似的設置和配置菜單和操作方法，這是一個大的系統集成，極大的節省時間。
IDR儀器提供一個廣闊的選擇信號輸入。選擇容易地選擇從遠程程序員的菜單，4個前面板按鈕，或通過串口或以太網通信。
IDR處理10種常見類型的熱電偶，多RTDS和幾個過程（DC）電壓和電流范圍。該模型還具有內置的激勵，24 VDC @ 25毫安。它的輸入信號的廣泛的選擇，這是測量或用熱電偶，溫度控制的一個很好的選擇，或4至20 mA變送器。
儀器的應變和過程（ISDR模型）測量輸入稱重傳感器，壓力傳感器，和大多數的應變儀傳感器以及過程中的電壓和電流范圍。這是具有內置的5或10伏直流勵磁橋式傳感器，5伏或10伏40毫安@ @ 60毫安（5和24伏之間的任何電壓是可以通過特殊的順序）。該模型支持4 -和6線橋通信，比例測量。
國際減災戰略特點的快速和容易的“過程”校準/縮放的信號輸入到任何單位工程。該模型還具有10點線性化，它允許用戶將輸入信號的非線性傳感器的各種極。
IDR提供簡單的手動開/關操作或全自動調諧PID控制（選擇預置調，自適應調整，PID，PI，PD控制模式）。雙重控制輸出可配置為多種獨立的控制和報警的應用程序，如熱/冷/熱，熱，熱/冷/報警，涼爽，涼爽/報警，或報警/報警。坡道定點功能允許用戶定義的速率上升到設定值，最大限度地減少熱沖擊負載在啟動。對于那些只需要簡單的菜單和沒有PID控制，限位報警（鋁）選項。
用戶可以選擇幾乎任何組合2控制或報警輸出：固態繼電器（SSR）形成的“C”SPDT繼電器和脈沖10 VDC輸出使用一個外部的SSR。
可選的模擬輸出可以被編程在范圍0到10伏或0到20毫安。它是可選的或一個控制輸出，或作為一個校準的重傳過程的獨特功能控制器之間的價值。
遠程程序員/顯示可以被編程為在任何給定值或報警點改變顏色。例如，該儀器可以編程，顯示過程值在琥珀中的綠色在預熱過程中，信號的正常工作范圍，并在紅色信號報警狀態。
嵌入式Web服務器選項允許你直接連接到以太網網絡和TCP / IP數據包中的標準數據傳輸服務的網頁，或者在局域網或互聯網。以串行通信選項，用戶可以從RS232，RS422，RS485之間的按鈕和菜單選擇，簡單的ASCII命令或Modbus。

規格：
Universal Temperature and Process Input Model (iDR)
Accuracy: ±0.5°C temp; 0.03% rdg process
Resolution: 1°/0.1° 10 μV process
Temperature Stability:
RTD: 0.04°C/°C
T/C @ 25°C (77°F): 0.05°C/°C cold-junction compensation
Process: 50 ppm/°C
NMRR: 60 dB
CMRR: 120 dB
A/D Conversion: Dual-slope
Reading Rate: 3 samples per second
Digital Filter: Programmable
Input Types: Thermocouple, RTD, analog voltage, analog current
Thermocouple Lead Resistance: 100 Ω max
Thermocouple Type (ITS 90): J, K, T, E, R, S, B, C, N, L
RTD Input (ITS 68): 100/500/1000 Ω Pt sensor; 2-, 3- or 4-wire; 0.00385 or 0.00392 curve
Voltage Input: 0 to 100 mV, 0 to 1 V, 0 to 10 Vdc
Input Impedance: 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc
Current Input: 0 to 20 mA (5 Ω load)
Configuration: Single-ended
Polarity: Unipolar
Step Response: 0.7 s for 99.9%
Decimal Selection: None, 0.1 for temperature; none, 0.1, 0.01 or 0.001 for process
Setpoint Adjustment: -1999 to 9999 counts
Span Adjustment: 0.001 to 9999 counts
Offset Adjustment: -1999 to 9999
Excitation: 24 Vdc @ 25 mA (not available with "-DC", "-C24" or "-C4EIT" option)

Universal Strain and Process Input Model (iSDR)
Accuracy: 0.03% rdg
Resolution: 10/1 μV
Temperature Stability: 50 ppm/°C
NMRR: 60 dB
CMRR: 120 dB
A/D Conversion: Dual-slope
Reading Rate: 3 samples per second
Digital Filter: Programmable
Input Types: Analog voltage, analog current
Voltage Input: 0 to 100 mVdc, -100 mVdc to 1 Vdc, 0 to 10 Vdc
Input Impedance: 10 MΩ for 100 mV; 1 MΩ for 1 or 10 Vdc
Current Input: 0 to 20 mA (5 Ω load)
Linearization Points: Up to 10
Configuration: Single-ended
Polarity: Unipolar
Step Response: 0.7 s for 99.9%
Decimal Selection: None, 0.1, 0.01 or 0.001
Setpoint Adjustment: -1999 to 9999 counts
Span Adjustment: 0.001 to 9999 counts
Offset Adjustment: -1999 to 9999
Excitation: 5 Vdc @ 40 mA; 10 Vdc @ 60 mA (not available with "-DC", "-C24" or "-C4EIT" option

Control
Action: Reverse (heat) or direct (cool)
Modes: Time and amplitude proportional control modes; selectable manual or auto PID, proportional, proportional with integral, proportional with derivative with anti-reset windup and on/off
Rate: 0 to 399.9 seconds
Reset: 0 to 3999 seconds
Cycle Time: 1 to 199 seconds; set to 0 for on/off operation
Gain: 0.5 to 100% of span; setpoints 1 or 2
Damping: 0000 to 0008
Soak: 00.00 to 99.59 (HH:MM), or off
Ramp to Setpoint:
00.00 to 99.59 (HH:MM), or off
Autotune: Operator-initiated from front panel

Control Output 1 and 2
Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID and ramp and soak
Output 1: SPDT type, can be configured as alarm 1 output
Output 2: SPDT type, can be configured as alarm 2 output
SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous
DC Pulse: Non-isolated; 10 Vdc @ 20 mA Analog Output (Output 1 Only): Non-isolated, proportional 0 to 10 Vdc or 0 to 20 mA; 500 Ω max Analog Output (Optional Output 3): Isolated, retransmission, 0 to 10 Vdc or 0 to 20 mA, 500 Ω max; accuracy is 1% of FS, for scaling gain from 0.03 to 100 mV per count. Isolation is 1000 Vdc; linearity is 0.2%

Network and Communications Options (-C24, -C4EIT, -EIT)
Ethernet: Standards compliance IEEE 802.3 10 Base-T
Supported Protocols: TCP/IP, ARP, HTTPGET
RS232/RS422/RS485/MODBUS: Selectable from menu; both ASCII and MODBUS protocol selectable from menu. Programmable 300 to 19.2K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status.
RS485: Addressable from 0 to 199
Connection: Screw terminals

Alarm 1 and 2 (Programmable)
Type: Same as output 1 and 2
Operation: High/low, above/below, band, latch/unlatch, normally open/normally closed and process/deviation
Analog Output (Programmable): Non-isolated, retransmission, 0 to 10 Vdc or 0 to 20 mA, 500 Ω max (output 1 only); accuracy is ±1% of FS when the following conditions are satisfied:
1. Input is not scaled below 1% of input FS
2. Analog output is not scaled below 3% of output FS

General
Line Voltage/Power: 90 to 240 Vac ±10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage. No CE compliance above 60 Hz.
Low-Voltage/Power Option: 24 Vac**; 12 to 36 Vdc; 20 to 36 Vdc for Ethernet and isolated analog output from qualified safety approved source ** Units can be powered safely with 24 Vac power, but no certification for CE/UL is claimed.

Insulation
Power to Input/Output: 2300 Vac per 1-minute test 1500 Vac per 1-minute test (for low-voltage power option)
Power to Relays/SSR Outputs: 2300 Vac per 1-minute test Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1-minute test
RS232/485 to Input/Outputs: 500 Vac per 1-minute test
Environmental Conditions: 0 to 55°C (32 to 131°F) (0 to 50°C for UL), 90% RH (non-condensing)
Approvals:
UL, C-UL, CE per EN61010-1:2001, FM (temperature units only)

產品型號   產品描述

iDR   Temperature/process (no outputs)

iDR22-EI   Temperature/process, Two solid state relays (SSRs): 0.5 A @ 120/240 Vac continuous, Ethernet with embedded Internet (wide case)

iDRA    Temp/process (no outputs) w/ isolated analog output

iDRA-C24-DC     Temperature/process w/ isolated analog output, Isolated RS-232 and RS-485, 300 to 19.2K baud and MODBUS, 12 to 36 Vdc (20 to 36 Vdc for iDRA), 24 Vac

iSDR Strain/process (no outputs)

ISDR24-C4EI    Strain/process, SSR and pulsed 10 Vdc @ 20 mA (for use with external SSR), Ethernet with embedded Web Server and isolated RS-485/422 hub for up to 31 devices and MODBUS (wide case)


選配件

iDRP Remote programmer/display

Software (Requires Network Option)

OPC-SERVER LICENSE  OPC server/driver software license

 

注釋:
1. "-DC", "-C24" or "-C4EIT" not available with excitation.
2. Analog output (option 5) is not available with "-AL" units.
3. Ethernet options are not available for the iDRA controller.
4. "iDRA0*-AL": 1 analog retransmission and 1 alarm.
5. 20 to 36 Vdc for "-C4EIT" and "-EIT"

產品型號說明
(1) (2) (3) (4) (5)

選項描述
(1) Series
選擇
iDR 代表 Temperature/process
iDRA 代表 Temp/process w/ isolated analog output *3
iSDR 代表 Strain/process
(2) Control Outputs
選擇
Nothing(leave field blank) 代表 Temperature/process with 2 control outputs
22 代表 Two solid state relays (SSRs) - 0.5 A @ 120/240 Vac continuous
23 代表 SSR and relay - Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
24 代表 SSR and pulsed 10 Vdc @ 20 mA (for use with external SSR)
33 代表 2 relays - Form ‘C’ SPDT 3 A @ 120 Vac 3 A @ 240 Vac
42 代表 Pulsed 10 Vdc @ 20 mA (for use with external SSR) and SSR
43 代表 Pulsed 10 Vdc @ 20 mA (for use with external SSR) and relay - Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
44 代表 Two pulsed 10 Vdc @ 20 mA (for use with external SSR)
52 代表 Analog output selectable as either control or retransmission of process value 0 to 10 Vdc or 0 to 20 mA @ 500 max and SSR
53 代表 Analog output 0 to 10 Vdc or 0 to 20 mA @ 500 max and relay
54 代表 Analog output 0 to 10 Vdc or 0 to 20 mA @ 500 max and pulse 10 Vdc
(3) Network Options
選擇
Nothing(leave field blank) 代表 No option
-C24 代表 Isolated RS232 and RS485 300 to 19.2K baud and MODBUS*1
-EIT 代表 Ethernet with embedded Internet *3 (wide case)
-C4EIT 代表 Ethernet with embedded Web server isolated RS485/422 hub for up to 31 devices and MODBUS*1 *3 (wide case)
(4) Power Supply
選擇
Nothing(leave field blank) 代表 Standard power input - 90 to 240 Vac/Vdc. 50 to 400 Hz (no entry required)
-DC 代表 12 to 36 Vdc (20 to 36 Vdc for iDRA) 24 Vac*1
(5) Factory Setup
選擇
Nothing(leave field blank) 代表 No option
-FS 代表 Factory setup and configuration

 IDR22

IDR52-EIT
IDR52-EIT-DC
IDR53
IDR53-C24
IDR53-C24-DC
IDR53-C4EIT
IDR53-C4EIT-DC
IDR42-C4EIT
IDR42-C4EIT-DC
IDR42-DC
IDR42-EIT
IDR42-EIT-DC
IDR43
IDR43,FS
IDR43-C24
IDR33-C4EIT
IDR33-C4EIT-DC
IDR33-DC
IDR33-EIT
IDR33-EIT-DC
IDR42
IDR42-C24
IDR42-C24-DC
CNIDRA43
CNIDRA43-C24
CNIDRA43-C24-DC
CNIDRA43-DC
CNIDRA44
CNIDRA44-C24
CNIDRA44-C24-DC
CNIDRA44-DC
ISDR22
ISDR22-C24
ISDR22-C24-DC
ISDR22-DC
ISDR23
ISDR33-DC
ISDR33-EIT
ISDR33-EIT-DC
ISDR42
ISDR42-C24
ISDR42-C24-DC
ISDR42-DC
ISDR43
IDRA22
IDRA22-C24
IDRA22-C24-DC
IDRA22-DC
IDRA23
IDRA23-C24
IDRA23-C24-DC
IDRA23-DC
IDRA24
IDRA24-C24
IDRA24-C24-DC
IDRA24-DC
CNIDRA22
CNIDRA22-C24
ISDR52-DC
ISDR53
ISDR53-C24
ISDR53-C24-DC
ISDR53-DC
ISDR54
ISDR54-C24
ISDR54-C24-DC
ISDR54-DC 
CNIDRA22-C24-DC
CNIDRA22-DC
CNIDRA23
CNIDRA23-C24
CNIDRA23-C24-DC
CNIDRA23-DC
CNIDRA24
CNIDRA24-C24
IDR44-C4EIT-DC
IDR44-DC
IDR44-EIT
IDR44-EIT-DC
IDR52
IDR52-C24
IDR52-C24-DC
IDR52-C4EIT
IDR52-C4EIT-DC
IDR52-DC
IDR53-DC
IDR53-EIT
IDR53-EIT-DC
IDR54
IDR54-C24
IDR54-C24-DC
IDR54-C4EIT
IDR54-C4EIT-DC
IDR54-DC
IDR54-EIT
IDR54-EIT-DC
ISDR23-C24
ISDR23-C24-DC
ISDR23-DC
ISDR24
ISDR24-C24
ISDR24-C24-DC
ISDR24-DC
ISDR33
ISDR33-C24
ISDR33-C24-DC
ISDR33-C4EIT
ISDR33-C4EIT-DC
IDR43-C24-DC
IDR43-C4EIT
IDR43-C4EIT-DC
IDR43-DC
IDR43-EIT
IDR43-EIT-DC
IDR44
IDR44-C24
IDR44-C24-DC
IDR44-C4EIT
IDR24-C24
IDR24-C24-DC
IDR24-C4EIT
IDR24-C4EIT-DC
IDR24-DC
IDR24-EIT
IDR24-EIT-DC
IDR33
IDR33-C24
IDR33-C24-DC
IDRA43-C24-DC
IDRA43-DC
IDRA44
IDRA44-C24
IDRA44-C24-DC
IDRA44-DC
CNIDRA42
CNIDRA42-C24
CNIDRA42-C24-DC
CNIDRA42-DC
IDR23-C24
IDR23-C24-DC
IDR23-C4EIT
IDR23-C4EIT-DC
IDR23-DC
IDR23-EIT
IDR23-EIT-DC
IDR24
CNIDRA24-C24-DC
CNIDRA24-DC
IDRA33
IDRA33-C24
IDRA33-C24-DC
IDRA33-DC
IDRA42
IDRA42-C24
IDRA42-C24-DC
IDRA42-DC
IDRA43
IDRA43-C24IDR22
IDR22-C24
IDR22-C24-DC
IDR22-C4EIT
IDR22-C4EIT-DC
IDR22-DC
IDR22-EIT
IDR22-EIT-DC
IDR23
ISDR43-C24
ISDR43-C24-DC
ISDR43-DC
ISDR44
ISDR44-C24
ISDR44-C24-DC
ISDR44-DC
ISDR52
ISDR52-C24
ISDR52-C24-DC

IDR22

IDR22傳感器-美國Omega原裝 相關產品

IDR22傳感器-美國Omega原裝 技術文章