商鋪名稱：深圳市邁凱瑞儀器儀表有限公司
聯系人：姚紅娟（小姐）
聯系手機：
固定電話：
企業郵箱：1946418560@qq.com
聯系地址：深圳市寶安區民治留仙大道2號天輔星大廈501
郵編：518000
聯系我時，請說是在焊材網上看到的，謝謝！
IQFlex|Litepoint|WIFI|WLAN測試儀|WIFI測試儀
品牌: 美國Litepoint
聯系人：姚小姐：電話13510169620 QQ:1946418560 廖先生13590256385 QQ：785298834
Testing WiFi in Manufacturing
In order to test WiFi during manufacturing you need to analyze a device’s transmitted signals, send precisely structured signals to the device’s receiver and check its response, then compare both transmitted and received characteristics against the appropriate 802.11x standard. You assume that the design is correct, so you are looking for manufacturing defects. The user interface should be very simple, and the test program should be designed for fastest speed with minimal “false” positive or negatives. LitePoint’s IQflex is designed for fastest deployment in production and fastest, most accurate, WiFi testing.
Testing Bluetooth in Manufacturing
Bluetooth is increasingly included in a range of devices from laptops to mobile phones. The LitePoint IQflex provides support with API based interfaces for testing of Bluetooth 1.0, 2.0, 2.1 and 3.0 devices. A full range of Bluetooth transmit and receive tests can be performed. The multiple personalities of IQflex provides manufacturing-floor simplification and cost savings as WLAN and Bluetooth capabilities merge in consumer devices.
IQflex® 802.11a/b/g/n Test Solution
You use LitePoint IQflex®, an all-in-one test instrument, for manufacturing testing of 802.11a/b/g/n WLAN products, such as network interface cards, access points and embedded components. With the appropriate software option, IQflex can also be used to test Bluetooth-equipped devices.
IQflex integrates a vector signal analyzer (VSA) for analyzing device transmitted signals, and a vector signal generator (VSG) for injecting precisely structured signals into a device’s receiver.
The tester’s VSA, for example, replaces traditional spectrum analyzers and
