商鋪名稱：深圳市泰立儀器儀表有限公司
聯系人：牟小姐（小姐）
聯系手機：
固定電話：
企業郵箱：taili668@vip.163.com
聯系地址：深圳市龍崗區龍翔大道9009號珠江廣場A2棟13D室
郵編：518000
聯系我時，請說是在焊材網上看到的，謝謝！
| 品牌：NewSonic | 型號：SonoDur 3 | 加工定制：否 | ||||
| 測量范圍：10 – 1999 NV | 產品類型：超聲波硬度計 | 試驗力：100 N | ||||
| 允許高度：164x86x23 mm | 重量：0.37 kg |
Motor probes (HV 0,1 – HV 0,8): 0.1 kgf, 0.3 kgf, 0.8 kgf
Android Operating System and Data Transfer| Measuring principle | UCI Method, corresponds to DIN 50159, ASTM A1038 | ||
| Test indenter | Vickers diamond 136° | ||
|
Test loads Newton scale (1kgf = 9.81 N) |
Motor probes: 1N (0.1 kgf), 3N (0.3kgf) and 8.6 N (0.9 kgf) Handheld Probes: 10N (1 kgf), 30N (3kgf), 49N (5kgf), 98N(10kgf), (Other test loads on request) |
||
|
Hardness scales and range (according to relevant standards), in this casetable A1 respectively T1, T2 (low alloy steel). Different measuring ranges are valid for othermaterials. When exceeding the limits theconversion range will be extended. The calcu-lated values are highlighted in red besides theoriginal data in HV. Note: Conversions are acc. to latest ASTM E140-12b?1(2013) und EN ISO 18265:2014. Conversions into tensile strength: 98N (10kgf)test load only. |
Vickers Brinell Rockwell Rockwell Rockwell Rockwell Rockwell 5,6 Rockwell (EN ISO 18265 only) Rockwell Knoop (ASTM E140 only) Shore (ASTM E140 only) Tensile strength |
HV HB HRB HRC HRE HRF HRA HRD HR45N HK HS MPa |
10 – 1999 (9999) 76 – 618 41 – 105 20,3 – 68 70 – 108,5 82,6 – 115,1 60,7 – 8 40,3 – 76,9 19,9 – 75,4 87 – 920 34,2 – 97,3 255 – 2180 |
| Measurement uncertainty* | < 4 % (HV5, HV 10). For other test loads and ranges see table below. | ||
| Relative repeatability* | < 5 % (HV5, HV 10). For other test loads and ranges see table below. | ||
|
Hardness scale |
Measurement uncertainty [%] | Relative repeatability [%] | ||||
| < 250 HV | 250 HV - 500HV | 500 HV - 800 HV | > 800 HV | < 250 HV | > 250 HV | |
| HV 0,1 | 5 | 6 | 7 | 8 | 8 | 6 |
| HV 0,3 | 5 | 6 | 7 | 8 | 8 | 6 |
| HV 0,8 | 4 | 4 | 5 | 6 | 8 | 6 |
| HV 1 | 4 | 4 | 5 | 6 | 8 | 6 |
| Operating time | >10 hours in measurement operation (depending on system performance,temperature and instrument settings), up to 8 hours continuous operation, quick exchangeable battery pack (3.7V 3900mAh LiPolymer) |
| Operating Temperature |
Probe: 0°C to ~ +45°C Instrument: -10° ~ +50°C // Charging +10°C ~ +40°C |
| Storage Temperature | -20°C ~ +70°C |
| Humidity | Max. 90%, non-condensing |
| Dimensions |
Instrument ca. 164x86x23 mm, Motor probe ?38mm, L=190 mm Handheld probe ?25 mm, L=176 mm (free length of rod ca. 12,5 mm) Handheld probe ?25 mm, L=207 mm (free length rod ca. 43 mm) |
| Weight |
Instrument ca. 320 gr (incl. battery pack) Handheld probe ca. 280 gr, Motor probe ca. 370 gr |
| Processor and Memory |
ARM ® Cortex?-A53 Octa Core 1.3 GHz / System 2GB RAM / storage me mory 16 GB eMMC / Micro SD card 4 GB (up to 32 GB ) |
| Operating system | Android 5.1 (Android 7.0) |
| Keypad | 4 function keys, system touch keyboard |
| Power |
Main battery: 3,7V / 3900mAh, LiPo hard pack, quick exchange Charging time: <3h to 80% capacity (Instrument off) Shelf Hours: Up to 6 months AC Power supply/charger: 90V to 264VAC 50/60Hz to 5VDC |
| Display |
5“ sunlight readable multi touch display (1280x720 pixel), LED-backlight (500 Cd/m2), adjustable |
| Interfaces |
Jack for 5VDC operating/ charging |Docking connector (charging) USB 2.0 Micro USB (PC) / probe connector Lemo 4 pos. Micro SD-card 4 GB (up to 32 GB) | 2x SIM card WLAN 802.11 a/b/g/n | WCDMA/HSDAP/HSPUA, FDD-LTE / TDD-LTE) | GSM/GPRS/EDGE (b2/b3/b5/b8 | GPS / AGPS / GLONASS Bluetooth 4.0 (supports BLE mode) | NFC | Speaker, microphone |
| Sensors / Camera / LED |
Light sensor, G-sensor, proximity sensor, rear camera 8 mega-pixel, multicolor status LED |
| IP-Proof | IP65 according IEC 60529 Edition 2.1:2001-02 |
| Drop test | MIL-STD-810G Methode 516.6, 4 ft. |
| Shock Test | MIL-STD-810G Methode 516.6 Prozedur I |
| Vibration Test | MIL-STD-810G Methode 514.6 Prozedur I |
| Instrument Language | D, EN, IT, FR, SP, PL, CZ, CN - more on request |
