激情都市亚洲,亚洲高清一区二,欧美亚洲成人网

商品詳情

洪澤縣西門子6ES7148-6CB00-0AA0

希殿電氣技術(上海)有限公司(西門子合作伙伴）
聯系人：康經理(銷售工程師）
Q Q :192061030
手機：18621061383(微信同步）
電話 :021-60541249
傳真：021-57271268
郵箱：192061030@qq.com

概述

接口容納一個原型的 CPV 10 或 CPV 14 FESTO “緊湊性能閥”組
將 ET 200pro 用于要求柔性度高的氣動裝置應用
高柔性度氣動裝置，有不同的閥功能和流量

應用

氣動接口專為初始 FESTO 閥門端子而設計。將 ET 200 pro 用于要求柔性度高的氣動裝置應用。

FESTO 標準產品具有多種閥功能和流量速度,可廣泛應用到多個領域。

CPV 10 或 CPV 14 FESTO 閥門端子可使用，并與 FESTO 標準產品一起提供。

設計

氣動接口包括：

數字輸出，用于閥門控制
使用夾子，安裝閥組

可提供兩個不同的氣動接口：

用于連接 CPV 10 閥組，閥片厚 10 mm, 流量速度 400 l/min
用于連接 CPV 14 閥組，閥片厚 14 mm, 流量速度 800 l/min

每個閥組，最多可達 8 個閥片（高達 16 個閥功能）

技術規范

Article number	6ES7148-4EA00-0AA0	6ES7148-4EB00-0AA0
	ET200PRO, 16DO,PNEUMATIC INTERFACE CPV10	ET200PRO, 16DO,PNEUMATIC INTERFACE CPV14
Supply voltage
Load voltage 2L+
● Rated value (DC)	24 V	24 V
● Short-circuit protection	Yes	Yes
● Reverse polarity protection	Yes	Yes
Input current
from load voltage 2L+, max.	300 mA; Including valves	370 mA; Including valves
from backplane bus 3.3 V DC, max.	25 mA	25 mA
Power loss
Power loss, typ.	2.6 W	3.7 W
Address area
Address space per module
● without packing	2 byte	2 byte
Digital outputs
Number of digital outputs	16	16
Load resistance range
● lower limit	500 ?	500 ?
● upper limit	2 500 ?	2 500 ?
Output current
● for signal "1" rated value	12 mA	16 mA
Switching frequency
● with inductive load, max.	25 Hz	20 Hz
Total current of the outputs (per group)
all mounting positions
— up to 55 °C, max.	250 mA; only up to 50 °C, limited by valves	330 mA; only up to 50 °C, limited by valves
Interrupts/diagnostics/status information
Diagnostic functions	Yes	Yes
Alarms
● Diagnostic alarm	Yes	Yes
Diagnostic messages
● Diagnostic information readable	Yes	Yes
Diagnostics indication LED
● Group error SF (red)	Yes	Yes
● Status indicator digital output (green)	Yes	Yes
Pneumatics
Number of connectable valves, max.	16	16
permissible working pressure, min.	3 bar	3 bar
permissible working pressure, max.	8 bar	8 bar
Rated flow rate	400 l/min	800 l/min
Parameter
Remark	Diagnosis load voltage 2L+	Diagnosis load voltage 2L+
Response to CPU/master STOP	No
Potential separation
between backplane bus and all other circuit components	Yes	Yes
Potential separation digital outputs
● between the channels and backplane bus	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety-oriented group deactivation	Yes	Yes
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1	d	d
● SIL acc. to IEC 61508	2	2
Dimensions
Width	90 mm	120 mm
Height	130 mm	152 mm
Depth	47 mm	47 mm

概述

用于將 ET 200AL 連接到 PROFIBUS 的接口模塊
作為 DPV1 從站，它可與 PLC 中的 PROFIBUS 主站進行數據交換
可連接最多 32 個 I/O 模塊
最大數據量為 244 字節，分別用于輸入和輸出數據
自動檢測通信速率 9.6 kbps ...12 MBd
PROFIBUS 地址 1 ...99，可通過旋轉開關進行設置
識別和維護數據 IM0 ...IM3
固件更新
組態管理（選件處理）

應用

IM 157-1 DP 接口模塊可用于將 ET 200AL 連接至 PROFIBUS，并可自主處理 I/O 模塊和控制器中的上位 PROFIBUS 主站之間的通信。

設計

接口模塊 IM 157-1 PN 可在任意位置安裝，可安裝在平坦表面或鋁制安裝導軌上。

IM 157-1 DP 具有以下功能：

兩個背板總線插座（ET 接口 1 和 2），用于連接 I/O 模塊
采用 M8 連接技術的電源接口，具有轉發功能
運行 (RUN)、錯誤 (Error) 和維護 (MAINT) 診斷顯示
用標簽來標識接口、模塊和插槽
集成式電纜扣開孔
模塊正面的清晰標簽：
- 用純文本表示模塊類型
- 接口標識
- LED 標簽
模塊側面的清晰標簽：
- 訂貨號、功能狀態和固件版本
- 二維矩陣碼（訂貨號和序列號）
- 所有接口的針腳分配

技術規范

Article number		6ES7157-1AA00-0AB0
		ET 200AL, IM 157-1 DP
General information
Product type designation		IM 157-1 DP
HW functional status		E01
Firmware version		V1.0.x
Vendor identification (VendorID)		81A9H
Product function
● I&M data		Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version		STEP 7 V13 SP1 or higher
● STEP 7 configurable/integrated as of version		From V5.5 SP4 Hotfix 3
● PROFIBUS as of GSD version/GSD revision		GSD as of Revision 5
Configuration control
via dataset		Yes
Supply voltage
Load voltage 1L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes; against destruction
Input current
Current consumption (rated value)		50 mA
from load voltage 1L+ (unswitched voltage)		4 A; Maximum value
from load voltage 2L+, max.		4 A; Maximum value
Power loss
Power loss, typ.		1.7 W
Address area
Address space per station
● Address space per station, max.		244 byte
Interfaces
Number of PROFIBUS interfaces		1
1. Interface
Interface type		PROFIBUS DP
Interface types
● RS 485		Yes
● M12 port		Yes; 2x M12 b-coded
Functionality
● PROFIBUS DP slave		Yes
Interface types
RS 485
● Transmission rate, max.		12 Mbit/s
PROFIBUS DP
Services
— SYNC capability		Yes
— FREEZE capability		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV0		Yes
— DPV1		Yes
Interrupts/diagnostics/status information
Alarms		Yes
Diagnostic functions		Yes
Diagnostics indication LED
● RUN LED		Yes; Green LED
● ERROR LED		Yes; Red LED
● MAINT LED		Yes; yellow LED
● Connection display DP		Yes; Green LED
Potential separation
between the load voltages		Yes
between PROFIBUS DP and all other circuit components		Yes
Isolation
Isolation tested with		707 V DC (type test)
Degree and class of protection
IP degree of protection		IP65/67
Ambient conditions
Ambient temperature during operation
● min.		-25 °C
● max.		55 °C
Connection method
Power supply		M8, 4-pole
ET-Connection
● ET-Connection		M8, 4-pin, shielded
Dimensions
Width		45 mm
Height		159 mm
Depth		46 mm
Weights
Weight, approx.		211 g