商鋪名稱：上海梓聰機電設備有限公司
聯系人：王兵（先生）
聯系手機：
固定電話：
企業郵箱：2355338861@qq.com
聯系地址：上海上海市嘉定區安亭鎮昌吉路156弄32號
郵編：
聯系我時，請說是在焊材網上看到的，謝謝！
歐陸可控硅
特征： These robust thyristor units are ideally suited for applications where voltage and current surges can be expected. Short wave infrared lamps for example can be controlled with TE10A using phase angle or advanced single cycle firing which reduces flicker. Flexibility The TE10A can be used with non-standard mains (option). Standard 45mm DIN window format allows mounting in a housing with a panel cut-out or DIN Rail mounting in a cabinet. Toughness/Reliability The thyristor breakdown voltage is three times greater than the nominal operating voltage. Current derating curves as a function of ambient temperature enable TE10A units to be used up to +60癈. 特征： These robust thyristor units are ideally suited for applications where voltage and current surges can be expected. Short wave infrared lamps for example can be controlled with TE10A using phase angle or advanced single cycle firing which reduces flicker. Flexibility The TE10A can be used with non-standard mains (option). Standard 45mm DIN window format allows mounting in a housing with a panel cut-out or DIN Rail mounting in a cabinet. Toughness/Reliability The thyristor breakdown voltage is three times greater than the nominal operating voltage. Current derating curves as a function of ambient temperature enable TE10A units to be used up to +60癈.
緊湊 : 減少控制柜尺寸
移相觸發
先進單周期
適用于短波紅外
內置EMC濾波器
電源補償
The TE10A is controlled by an analogue signal which is selectable for DC current or voltage. A ? Volts user?voltage allows local control by a potentiometer. A plug-in connector avoids any risk of wiring error if the unit has to be replaced.
TE10A thyristors can withstand momentary over currents up to 15 times the nominal rating. This is important when controlling short-wave infrared elements.
緊湊 : 減少控制柜尺寸
移相觸發
先進單周期
適用于短波紅外
內置EMC濾波器
電源補償
The TE10A is controlled by an analogue signal which is selectable for DC current or voltage. A ? Volts user?voltage allows local control by a potentiometer. A plug-in connector avoids any risk of wiring error if the unit has to be replaced.
TE10A thyristors can withstand momentary over currents up to 15 times the nominal rating. This is important when controlling short-wave infrared elements.
