商鋪名稱:河北會泉泵業有限公司
聯系人:徐經理(先生)
聯系手機:
固定電話:
企業郵箱:1815991877@qq.com
聯系地址:河北省石家莊市橋西
郵編:5000
聯系我時,請說是在焊材網上看到的,謝謝!
ZJW泵@嘉興煤泥壓濾機泵@煤泥壓濾機泵低耗節能
Packing failure is movable platen clamping force up to the upper limit of the electric contact pressure gauge, pump stopped working. During operation (feed pressure filtration), the system will automatically compensate for the missing value when pressed after the hydraulic pressure is lowered to the pressure gauge, the pinch feed hydraulic pressure is lowered pressure filtration material leakage. The solution is to check the oil, the piston seal leaks, replace the check valve seals, cleaning pilot check valve.
一、產品概述
ZJW型壓濾機專用泵本由公司結合各壓濾機生產廠家及使用現場的實際工況,精心設計開發的新一代無泄漏壓濾機專用泵,該產品廣泛應用于壓濾機入料泵應用尤為廣泛,通過在冶金、礦山、電廠、化工等行業中的使用,發現該系列產品具有結構
合理,運行可靠,壽命長等特點。該系列產品采用獨特的水力設計及雙級葉輪的結構,確保了其性能曲線比一般YLB、UHB、HFTK等普通離心泵改造而成的壓濾機入料泵更陡,更適合壓濾機入料的特殊使用工況。jdhuiquan4.12
ZJW泵@嘉興煤泥壓濾機泵@煤泥壓濾機泵低耗節能
4, often check the sealing surface of the filter plate, to ensure its smooth, clean, before pressing, to filter cloth carefully examined to ensure that no folding frame filter, no damage, no slag to make it smooth intact, to ensure that the role of the filter press, plate and frame filter press to always wash cloth, ensure good penetration of the filtrate. However, if the image is the same filter Changzhou Yaron EHV series, with high pressure, the processed sludge cake tack-free, low moisture content, without having to constantly check the permeability of the filter cloth.
二、創新技術特點
1.獨特的密封裝置采用負壓技術加組合密封裝置,在壓力不斷增加而流量逐漸減少的情況下,密封組件不承受壓力,尤其是在后期壓榨期時因泵在大壓力下,其創新密封結構設計,保證軸封處基本達到無泄漏。
2.雙級葉輪的結構設計
該泵采用雙主泵體,雙主葉輪的結構設計,解決了單泵單葉輪泵在入料初期時振動和噪音過大、性能曲線平坦、葉輪流道窄、通過性能差等缺點非常適合壓濾機入料時應阻力的變化來實現大流量低壓力喂料與小流量、高壓力過濾的要求。
3.雙葉輪泵比單葉輪泵抗耐磨性更好
因雙葉輪泵以較低的葉輪出口線速度獲得更高的泵出口壓力從而克服了單葉輪泵為增加壓力而增加葉輪線速度,而導致葉輪、泵殼磨損加劇的缺點,有效的提高水泵等過流部件的壽命。
4.應用范圍廣
該產品可采用鑄鋼、高鉻鑄鐵(耐腐耐磨材料)、不銹鋼等多種材質制造,可適合不同的介質需求,用戶選用的范圍更廣。
5.葉輪與泵壁的間隙可調
獨特的軸承箱設計,用戶在常時間使用后,因磨損造成壓力下降時,可通過調整葉輪與泵壁的間隙來繼續保障水泵的高壓力,提高了水泵的使用壽命、延長了大修周期,克服了傳統單葉輪壓濾泵因磨損壓力下降快,經常更換葉輪使用壽命短等缺點。
ZJW泵@嘉興煤泥壓濾機泵@煤泥壓濾機泵低耗節能
Filter plate and frame filter cloth near the contact nip portion should ensure a flat, wrinkle does not occur, the filter cloth is formed is pressed to prevent damage to or mud leak filter plate. Long tail extending into the snap ring to prevent or nip where the filter plate and filter cloth is damaged, or a leak to form a slurry, should be cut short tail. When frame filter means, or should be noted that no foreign matter larger sludge particles between the filter plate and filter cloth, foreign matter or larger sludge particles when the laminate may form a filter plate or damaged filter cloth.
三、性能參數表
型號 |
轉 速 (r/min) |
流 量 (m3/h) |
揚 程 (m) |
軸功率 (k/h) |
選配電機 功率(kw) |
65ZJW-III |
1480 |
27.5 41.4 55.2 69.0 80.0 |
76.0 72.2 66.1 56.0 43.5 |
22.3 |
Y225S-4 30KW |
Y225S-4 37KW |
|||||
80ZJW-III |
1480 |
40.0 60.0 80.0 100 115 |
76.0 72.2 66.1 56.0 43.5 |
32 |
Y225S-4 37KW |
Y225M-4 45KW |
|||||
100ZJW-III |
1480 |
56.0 85.0 113 150 169 |
73.3 69.0 62.5 51.2 44.0 |
49 |
Y225M-4 45KW |
Y250M-4 55KW |
|||||
125ZJW-III |
1480 |
70.0 105 140 186 245 |
73.5 71.6 68.6 61.9 48.5 |
62.5 |
Y250M-4 55KW |
Y280S-4 75KW |
|||||
125ZJW-III |
1480 |
79.7 119 159 211 279 |
80.0 78.0 74.8 67.5 52.9 |
78.2 |
Y280S-4 75KW |
Y280M-4 90KW |
|||||
125ZJW-III |
1480 |
58.0 87.0 116 154 203 |
91.8 89.1 85.7 77.3 60.6 |
64.7 |
Y280S-4 75KW |
Y280M-4 90KW |
ZJW泵@嘉興煤泥壓濾機泵@煤泥壓濾機泵低耗節能
Third, do not form a cake or cake cake do not form or constitute causes of uneven uneven There are many, lack of feed or too thin, there may be obstruction can cause this phenomenon. Investigation and the reasons for these problems to be thin, after all, to find the problem when cut, then symptomatic and treatment to solve the problem. The primary solutions are: add a feed, adjusting the process, improve feeding, finishing fabric or replace the filter cloth, finishing the obstruction, finishing feed holes, finishing drainage holes, finishing or replace the filter cloth, or add pressure pump power, low-voltage start, constantly boost and other methods.
專業的工程師快速的對您的需求選擇合適的產品,而且供給合理牢靠的主張。黎凱泵業專業出產各類水泵,多年的出產履歷確保產品高水平制作工藝。客戶無需為產品的參數和功用苦惱供給的低價的價格。黎凱專業的出售人員能夠快速的對產品信息進行分析。