性能參數的選擇泵型確定后，揚程和流量是選擇泵規格大小和是否串聯的依據。輸送高濃度強磨蝕性渣漿，一般不選用泵轉數nmax(性能曲線中多種轉數的轉數)，選擇轉數為3/4nmax左右比較合適。當選定的泵在3/4 nmax時，流量合適而揚程達不到，可采用多臺泵串聯形式。對于沃曼泵，不同的漿體，流量范圍也要有所限制；對于高濃度強磨蝕的渣漿。2流量應選泵效率對應流量的40—80%范圍內；對于濃度低磨蝕渣漿，流量應選在泵效率對應流量的40%—100%范圍內。一般不選擇在效率對應流量的100%—120%范圍內。

洱源4/3D-AH脫水篩渣漿泵新價格@4/3D-AH脫水篩渣漿泵渣漿泵運行中，要注意填料壓蓋部位的溫度和滲漏。正常的填料滲漏應不超過每分鐘10-20滴。huiquanjdzj

Shaft seal(seal): The shaft seal type of the pump has packing seal, cover impeller seal, mechanical seal.
Transmission: There are V-type triangular belt transmission, elastic coupling transmission, gear gearbox transmission, hydraulic coupling transmission, frequency conversion drive device, Silicon controllable speed adjustment and so on. Among them, the V-type triangular belt drive has CL, CV, CR, ZL, ZV, and ZR transmissions.
Overall performance: wide range of pump performance, cavitation performance, high efficiency. Multistage tandem technology can be used for long-distance transportation. There are a variety of metals available for the flow parts and the depth is increased. With various speeds and variations, the pump is operated under good engineering. Long service life, high operating efficiency, can be many kinds of poor transportation conditions.

洱源4/3D-AH脫水篩渣漿泵新價格@4/3D-AH脫水篩渣漿泵軸承組件：泵的軸承組件采用圓筒式結構，便于葉輪與前護板的間隙，時可整體拆出。軸承采用油脂。