youjizzjizz亚洲,久久久无码精品亚洲日韩按摩,久久久123

商品詳情

Category 類別	Trade- Mark 牌號	Equivalent to China Standard 相當國標	Characteristics & application 特性和用途	Equivalent to AWS 相當AWS
Hard-surfacing 硬面堆焊	D 667	EDZCr-B-15	HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part. HRc≥48，耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件
	D 802	EDCoCr-A-03	HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter. HRc38-47，耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃	ECoCr-A
	D 812	EDCoCr-B-03	HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve. HRc45-50，耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥	ECoCr-B
	D 822		HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler. HRc≥53，耐熱、耐磨，但抗沖擊性差。堆焊鍋爐旋轉葉輪
	D 832	EDCoCr-C-03	HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way. HRc≥50，耐熱、耐磨。堆焊高溫工件如熱軋導軌	ECoCr-C
	D 842	EDCoCr-D-03	HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die. HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。堆焊熱鍛模
Cast iron 鑄鐵	Z 308	EZNi	Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool. 純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛	ENi-Cl
	Z 408	EZNiFe	Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap. 鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋	ENiFe-Cl
	Z 508	EZNiCu-1	Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load. 鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊	ENiCu-B
Copper alloys 銅合金	Cu 107	ECu	Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row. 紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排	ECu
	Cu 207	ECuSi	Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用	ECuSi
	Cu 227	ECuSnB	Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用	ECuSn-C
	Cu 237	ECuAl	Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys. 鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或堆焊用	ECuAl-A2
Aluminum alloys 鋁合金	Al 109	TAl	Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum. 純鋁，耐蝕性好，但強度不高，純鋁焊接用	E1100
	Al 209	TAlSi	Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys. 鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金	E4043
	Al 309	TAMn	Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys. 鋁錳，強度高，耐蝕。鋁合金焊接用	E3003
Nickel alloys 鎳合金	Ni 102	ENi-1	Pure nickel. Welding and surfacing of nickel and nickel to steel. 純鎳，用于鎳、鎳與鋼的焊接與堆焊	ENi-1
Nickel alloys 鎳合金	Ni 207	ENiCu-7	Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel. 鎳銅，用于鎳銅、鎳銅與鋼的焊接與堆焊	ENiCu-7

Category 類別	Trade mark 牌號	Chemical composition 主要成份(%)	Characteristics & application 特性和用途	Equivalent to AWS 相當AWS
Hardfacing 硬面堆焊	S 101	C3 Cr28 Ni4 Si3.5 Fe Rem.	HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump. HRc48-54，耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒，泵套
	S 111	C1 Cr29 W5 Co Rem.	HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve. HRc38-47，高溫下耐磨、耐蝕。堆焊高溫高壓閥門	ECoCr-A
	S 112	C1.5 Cr29 W8 Co Rem.	HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass. HRc45-50，高溫下耐磨、耐蝕。堆焊閥門，熱軋孔型	ECoCr-B
	S 113	C2.5 Cr30 W17 Co Rem.	HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage. HRc≥55，高溫下耐磨、耐熱，但抗沖擊性差。堆焊螺旋送料機用
	S 114	C2.5 Cr30 W12 Co Rem.	HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit. HRc≥53，高溫下耐磨、耐熱，但抗沖擊較差。堆焊牙輪鉆頭	ECoCr-C
Copper alloys 銅合金	S 201	Sn1 Si0.3Mn0.3 Cu Rem.	Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 機械性能好，抗裂性好。紫銅氣焊及氬弧焊用	ERCu
	S 211	Si3 Mn1 Cu Rem.	Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 機械性能好，銅合金氬弧焊及鋼的MIG釬焊用	ERCuSi-Al
	S 212	Sn5 Cu Rem.	Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用	ERCuSn-A
	S 213	Sn8 Cu Rem.	Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用	ERCuSn-C
	S 214	Al7.5 Cu Rem.	Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用	ERCuAl-A1
	S 215	Al9 Cu Rem.	Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用	ERCuAl-A2
	S 221	Cu60 Sn1 Si0.3 Zn Rem.	Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
	S 221F	Cu60 Sn1 Si 0.3 Zn Rem.	S221 welding rod coated with flux. 外涂焊劑的S221焊絲
	S 222	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵	RBCuZn-C
	S 222F	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	S222 welding rod coated with flux. 外涂焊劑的S222焊絲	RBCuZn-C
	S 223	Cu59 Sn0.6 Zn Rem.	Melting point is about 900℃. Braze welding of copper, steel and cast iron. 熔點約900℃。銅、鋼、鑄鐵釬焊用	RBCuZn-A
	S 224	Cu62 Si0.5 Zn Rem.	Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
Copper alloys 銅合金	S 225	Cu48 Ni10 Zn Rem.	Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys. 熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用	RBCuZn-D
	S 225F	Cu48 Ni10 Zn Rem.	S225 welding rod coated with flux. 外涂焊劑的S225焊絲	RBCuZn-D
	S 226	Cu60 Sn0.3 Si0.2 Zn Rem.	Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron. 熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵
	S 227	Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem.	Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵	RBCuZn-B
	S 229	Cu55 Ni6 Mn4 Zn余	Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide. 熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用
Aluminum alloys 鋁合金	S 301	Al≥99.5	Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蝕。純鋁氣焊、氬弧焊用	ER1100
	S 311	Si5 Al Rem.	Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys. 抗裂性好，通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金	ER4043
	S 321	Mn1.3 Al Rem.	Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用
	S 331	Mg5 Mn0.4 Al Rem.	Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蝕，強度高。鋁合金氬弧焊用	ER5183

斯米克釬焊料分別有：（銅鋅釬焊料），（銅磷銀基釬焊料），（鋁基釬焊料），（錫鉛釬焊料），（鎳基釬焊料).簡介如下：

Category 類別	Trade-mark 牌號	Specification 規格	Melting Point 熔點(℃)	Chemical composition 主要成份(%)	Application 用途	Equivalent to AWS 相當AWS
Copper zinc 銅鋅	L103	Wire & rod 絲	885-888	Cu54 Zn Rem.	Brazing of copper, bronze and steel, subjected to low load. 釬焊銅、青銅和鋼等受力不大工件
Copper zinc 銅鋅	L104	Foil 箔	890-930	Cu57 Mn2 Co2 Zn Rem.	Brazing of carbide cutting tool. 釬焊硬質合金刀具
Copper phosphorus 銅磷	L201	Cast rod, wire & rod, powder 鑄條、絲、粉	710-800	P7 Cu Rem.	Brazing of copper and copper alloys. 釬焊銅及銅合金	BCuP-2
	L204	Cast rod, wire 鑄條、絲	640-815	P5 Ag15 Cu Rem.	Brazing of copper, copper alloys, silver and molybdenum etc. 釬焊銅及銅合金、銀、鉬等金屬。	BCuP-5
	L205	Cast rod, wire & rod, powder 鑄條、絲、箔	640-800	P6 Ag5 Cu Rem.	Brazing of copper and copper alloys. 釬焊銅及銅合金	BCuP-3
	L207	Cast rod, wire & rod 鑄條、絲	640-770	P7 Ag5 Cu Rem.	Brazing of copper and copper alloys. 釬焊銅及銅合金	BCuP-7
	L209	Cast rod, wire 鑄條、絲	684-710	P7 Ag2 Cu Rem.	Brazing of copper and copper alloys. 釬焊銅及銅合金。	BCuP-6
Silver base 銀基	L302	Wire & rod 絲	745-775	Ag25 Cu40 Zn Rem.	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等
	L303	Wire & rod 絲	660-725	Ag45 Cu30 Zn余	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等	BAg-5
	L303F	Flux coated rod 涂藥絲	660-725	Ag45 Cu30 Zn Rem.	L303 coated with flux, the same application as L303. 外涂釬劑的L303，用途與L303相同	BAg-5
	L304	Foil 箔	690-775	Ag50 Cu34 Zn Rem.	Brazing of copper, copper alloys and steel etc. 釬焊銅及銅合金、鋼等	BAg-6
	L308	Wire & rod 絲	779-780	Ag72 Cu Rem.	Brazing of copper and nickel under vacuum or reducing protective atmosphere. 銅和鎳的真空或還原保護氣氛釬焊	BAg-8
	L312	Wire & rod 絲	595-605	Ag40.Cu.Zn.Cd	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等
	L313	Wire & rod 絲	625-635	Ag50.Cu.Zn.Cd	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等	BAg-1a
	L321	Wire & rod 絲	615-650	Ag56.Cu.Zn.Sn	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等	BAg-7
	L323	Wire & rod 絲	665-755	Ag30.Cu.Zn.Sn	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等
	L325	Wire & rod 絲	645-685	Ag45.Cu.Zn.Sn	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等	BAg-36
	L326	Wire & rod 絲	650-720	Ag38.Cu.Zn.Sn	Brazing of copper, copper alloys, steel and stainless steel etc. 釬焊銅及銅合金、鋼及不銹鋼等	BAg-34
Aluminum base 鋁基	L400	Cast rod, wire & rod 鑄條、絲	577-582	Si11.5 Al Rem.	Brazing of aluminum and aluminum alloys. 鋁及鋁合金的釬焊	BAlSi-4
Aluminum base 鋁基	L401	Cast rod 鑄條	525-535	Si5 Cu28 Al Rem.	Brazing of aluminum and aluminum alloys. 鋁及鋁合金的釬焊
Tin lead 錫鉛	L600	Wire & rod 絲	183-185	Sn60 Sb≤0.8 Pb Rem.	Soldering of fusible metals and heat-treated part. 易熔金屬及熱處理件的釬焊	60Sn
	L601	Wire & rod 絲	183-227	Sn18 Sb2 Pb Rem.	Soldering of copper, copper alloys and galvanized iron plain sheet. 銅及銅合金、鍍鋅鐵皮的釬焊。	18Sn
	L602	Wire & rod 絲	183-256	Sn30 Sb2 Pb Rem.	Soldering of copper, brass, copper alloys and galvanized iron plain sheet. 銅、黃銅、鐵、鍍鋅鐵皮的釬焊	30Sn
	L603	Wire & rod 絲	183-235	Sn40 Sb2 Pb Rem.	Soldering of copper, copper alloys, steel and zinc parts. 銅及銅合金、鋼、鋅制零件的釬焊	40Sn
	L604	Wire & rod 絲	183-222	Sn90 Sb≤0.15 Pb Rem.	Soldering of copper and steel for food and medicine field. 食品、醫療所需銅、鋼等金屬的釬焊	90Sn
	L605	Wire & rod 絲	232-240	Ag5 Sn95	Soldering of copper and steel for electrical and food field. 電器、食品所需銅、鋼等金屬的釬焊
	L608	Wire & rod 絲	295-305	Sn5.5 Ag2.5 Pb Rem.	Soldering of copper, copper alloys, steel and stainless steel. 銅及銅合金、鋼及不銹鋼的釬焊
Nickel base 鎳基	L702	Powder 粉	970-1000	Cr7 B3 Si4 Ni Rem.	Brazing of stainless steel under vacuum or protective atmosphere. 不銹鋼真空或保護氣氛釬焊	BNi-2

Category 類別	Trade-mark 牌號	Product name 名稱	Characteristics & application 特性和用途
Gas welding 氣焊	CJ301	Copper gas welding flux 銅氣焊熔劑	Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys. 熔點約650℃，銅及銅合金氣焊或釬焊的助熔劑
Gas welding 氣焊	CJ401	Aluminum gas welding flux 鋁氣焊熔劑	Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys. 熔點約560℃，鋁及鋁合金氣焊的助熔劑
Silver brazing 銀釬焊	QJ101	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃. 在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
	QJ102	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. 在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
	QJ102A	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration. 在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊
	QJ112	Silver brazing paste flux 膏狀銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. 在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
	QJ103	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃. 在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
Aluminum brazing 鋁釬焊	QJ201	Aluminum brazing flux 鋁釬焊熔劑	Brazing flux of aluminum and aluminum alloys within 450-620℃. 在450-620℃范圍釬焊鋁及鋁合金的助熔劑
Aluminum brazing 鋁釬焊	QJ207	Aluminum brazing flux 鋁釬焊熔劑	Brazing flux of aluminum and aluminum alloys within 560-620℃. 在560-620℃范圍釬焊鋁及鋁合金的助熔劑

Category 類別	Trade- mark 牌號	Chemical composition 化學成份(%)	Hardness 硬度	Application 用途
Oxy- Acetylene Flame spray- using 氧乙炔焰噴焊	F103	Cr10 B1.5 Si3 Ni Rem.	HRc 25	Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide. 鑄鐵件的噴焊，如玻璃模具，汽缸、導軌
	F101	Cr10 B2.5 Si3 Ni Rem.	HRc 45	Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump. 耐磨、耐蝕件的噴焊，如閥門、泵轉子、泵柱塞
	F101Fe	Cr10 B2.5 Si3 Fe10 Ni Rem.	HRc 45	Spray-fusing of corrosion-resistant parts, such as axle and stigma. 耐磨件的噴焊，如軸類、汽門
	F102	Cr16 B4 Si4 Ni Rem.	HRc 60	Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston. 耐磨、耐蝕、抗高溫氧化工件的噴焊，如模具、柱塞
	F102Fe	Cr16 B4 Si4 Fe15 Ni Rem.	HRc 60	Spray-fusing of corrosion-resistant parts, such as axle and cold die. 耐磨件的噴焊，如軸類、冷模具
	F105	F102+50%WC	HRc 60	Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan. 抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片
	F105Fe	F102Fe+35%WC	HRc 60	Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan. 抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片
	F108	F102+80%WC	HRc 60	Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger. 抗強烈磨粒磨損，無需加工場合的噴焊，如挖泥船耙齒
	F301	Cr5 B4 Si4 Ni30 Fe Rem.	HRc 45	Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree. 農機,礦山機械易損件的噴焊，如齒輪，車軸
	Track iron powder 軌鐵粉	Cr5 B1.5 Si3 Ni30 Fe Rem.	HRc 28	Repair spray-fusing of defects such as scratch and concavity of railroad track. 鐵路鋼軌擦傷、低塌等缺陷的修復噴焊
Oxy-acetylene flame spraying 氧乙炔焰噴涂	F111	Cr5 B1.5 Si3 Ni30 Fe Rem.	HB 150	Spraying of bearing and cutting parts etc. 軸承、切削件等的噴涂
	F113	Cr10 B1.5 Si3 Ni Rem.	HB 250	Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance. 噴涂亦可噴焊，如滾筒、柱塞、耐蝕耐磨軸等
	F313	Cr15 B1.5 Fe Rem.	HB 250	Spraying of dryer of papermaking and axle. 造紙烘缸、軸類的噴涂
	F314	Cr18 Ni9 B1.5 Fe Rem.	HB 250	Spraying of axle. 軸類噴涂
	F412	Sn10 P0.3 Cu Rem.	HB 80	Spraying of axle and bearing. 軸、軸承的噴涂
	F512	復合Al5Ni95		Backing spray of transition layer between base and working layer. 噴涂層的基體與工作層之間過渡（打底）層用噴涂
PTA hardfacing 等離子弧噴焊	F221	Cr26 W5 B0.7 Co Rem.	HRc 43	PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool. 高溫高壓閥門密封面、熱剪切刃口的等離子噴焊
	F223	Cr21 W5 B1.5 Co Rem.	HRc 40	PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower. 高溫下耐磨耐蝕件的噴焊，如高溫高壓閥門、鼓風機
	F321	Cr13 B1.5 Si1 Fe Rem.	HRc 45	PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc. 中溫中壓閥門的閘板及其他耐磨件的等離子噴焊
	F322	Cr23 Ni13 Si5 B1 Fe Rem.	HRc 40	PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc. 中溫中壓閥門的閥座及其他耐磨件的等離子噴焊
	F422	Sn10 P0.3 Cu Rem.	HB 80	PTA hardfacing of axle and bearing etc. 軸、軸承等離子噴焊

抗蠕變低合金鋼電焊條(SMAW Electrodes for Creep Resistant Low-Alloyed Steels)

產品牌號	分類標準及標號
	AWS A…				EN…
SH Schwarz 3 T	5.5:		E8013-G		1599：	E Mo R 12
SH Schwarz 3 TR	5.5:		E8013-G		1599：	E Mo R 12
SH Kupfer 1 TR	5.5:		E8013-G		1599：	E CrMo 1 R 12
Phoenix Blau Mo	5.5:		E7011-A1		1599：	E Mo R 11
SH Schwarz 3 K	5.5:		E7015-G (～A1)		1599：	E MoB 42 H5
SH Schwarz 3 KR	5.5:		E7015-G (～A1)		1599：	E MoB 42 H5
SH Schwarz 3 MK	5.5:		E7018-G (～A1)		1599：	E MoB 42 H5
SH Schwarz 3 K Ni	5.5:		E9018-G		499：	E 50 4 1 NiMo B 42 H5
Thyssen NiMo 100	5.5:		E10018-G (～D2)		757：	E 62 4 Mn 1 NiMo B 42 H5
產品牌號		分類標準及標號
		AWS 5.5:		EN1599：
Phoenix Chromo 1 K		E8018-B2		E CrMo 1 B 42 H5
Thyssen Chromo 1		E8018-B2		E CrMo 1 B 42 H5
SH Kupfer 1 K		E8018-B2		E CrMo 1 B 42 H5
SH Kupfer 1 KC		E8018-G(～B2)		EZ CrMo 1 B 42 H5
SH Kupfer 3 K		E9015-G		E CrMo 1 B 42 H5
SH Kupfer 3 KC		E9015-G		EZ CrMoV 1 B 42 H5
SH Chromo 2 KS		E9015-B3		E CrMo 2 B 42 H5
Thyssen Chromo 2 V		E9015-G		E CrMo 2 V B 42 H5
Thyssen Chromo 3 V		E9015-G		E CrMo 3 V B 42 H5
Thyssen Chromo 5		E8015-B6		E CrMo 5 B 42 H5
Thyssen Chromo 9 V		E9015-B9		E CrMo 9 1 B 42 H5
Thyssen Chromo T 91		E9015-B9		-
Thermanit MTS 4		-		E CrMoWV 12 B 42 H5
Thermanit MTS 616		E9015-G(～B9)		EZ CrMoWV 9 0.5 2 B 42 H5
Thermanit MTS 911		E9015-G(～B9)		E CrMo 9 1 1 B 42 H5

細晶粒低合金結構鋼電焊條 (Fine Grained Low-Alloyed Structural Steels SMAW

產品牌號	分類標準及標號
產品牌號	AWS A…		EN…
Phoenix 120 K	5.1:	E7018-1	499:	E 42 5 B 32 H5
SH Grün K 70	5.5:	E8018-G	499:	E 46 4 B 42 H5
SH Schwarz 3 K	5.5:	E7015-G (～A1)	1599:	E MoB 42 H5
SH Schwarz 3 MK	5.5:	E7018-G (～A1)	1599:	E MoB 42 H5
SH Schwarz 3 K Ni	5.5:	E9018-G	499:	E 50 4 1 NiMo B 42 H5
SH V 370	5.5:	E8018-C3	499:	E 46 6 1 Ni B 42 H5
SH V 1	5.5:	E8018-G (～C3)	499:	E 50 6 Mn 2 Ni B 42 H5
SH Ni 2 K 70	5.5:	E8018-C1	499:	E 46 6 2 Ni B 42 H5
SH Ni 2 K 90	5.5:	E10018-M	757:	E 55 5 NiMo B 42 H5
SH Ni 2 K 100	5.5:	E11018-M	757:	E 69 5 Mn 2 NiCrMo B 42 H5
SH Ni 2 K 130	5.5:	E12018-G (～M)	757:	E 89 4 Mn 2 Ni 1CrMo B 42 H5

低溫鋼實心、藥芯焊絲(Low-Alloyed Structural Steels GTAW rods/wires, GMAW,

產品牌號	類別	分類標準及標號
產品牌號	類別	AWS A…		EN…
Union I 1,2 Ni	GTAW	5.28:	ER80S-G	1668:	W3Ni1
Union I 5 Ni	GMAW	5.28:	ER80S-G	440:	G463CG3Ni1/G505MG3Ni1
Union I 2,5 Ni	GTAW	5.28:	ER80S-Ni2	1668:	W2Ni2
Union Ni 2,5	GMAW	5.28:	ER80S-Ni2	440:	G506MG2Ni2

高強鋼實心焊絲(High Tensile Steels GTAW rods/wires and GMAW w

產品牌號	類別	分類標準及標號
產品牌號	類別	AWS A5.28:	G EN 12534:
Union MoNi	GMAW	ER90S-G	G Mn3Ni1Mo
Union NiMoCr	GMAW	ER100S-G(~1)	G Mn4Ni1,5CrMo
Union X 85	GMAW	ER110S-G	G Mn4Ni1,5CrMo
Union X 90	GMAW	ER120S-G	G Mn4Ni2CrMo
Union X 96	GMAW	ER120S-G	G Mn4Ni2,5CrMo

抗蠕變鋼實心、藥芯焊絲(Creep Resistant Low-Alloyed Steels GTAW rods/wires, GMAW

產品牌號	類別	分類標準及標號
產品牌號	類別	AWS A5.28:	EN…
Union I Mo	GTAW	ER80S-G	1668： 12070：	W2Mo W MoSi
Union I Mo*	GMAW	ER80S-G	440： 12070：	G2Mo G MoSi
Thyssen MV Mo*	MCAW	ER80C-G H4	758： 12071：	T 46 2 Mo M M 2 H5 T Mo MM 2 H5

低溫鋼實心、藥芯焊絲(Low-Alloyed Structural Steels GTAW rods/wires, GMAW,

產品牌號	類別	分類標準及標號
產品牌號	類別	AWS A…		EN…
Union I 1,2 Ni	GTAW	5.28:	ER80S-G	1668:	W3Ni1
Union I 5 Ni	GMAW	5.28:	ER80S-G	440:	G463CG3Ni1/G505MG3Ni1
Union I 2,5 Ni	GTAW	5.28:	ER80S-Ni2	1668:	W2Ni2
Union Ni 2,5	GMAW	5.28:	ER80S-Ni2	440:	G506MG2Ni2

高強鋼實心焊絲(High Tensile Steels GTAW rods/wires and GMAW

產品牌號	類別	分類標準及標號
產品牌號	類別	AWS A5.28:	G EN 12534:
Union MoNi	GMAW	ER90S-G	G Mn3Ni1Mo
Union NiMoCr	GMAW	ER100S-G(~1)	G Mn4Ni1,5CrMo
Union X 85	GMAW	ER110S-G	G Mn4Ni1,5CrMo
Union X 90	GMAW	ER120S-G	G Mn4Ni2CrMo
Union X 96	GMAW	ER120S-G	G Mn4Ni2,5CrMo

抗蠕變鋼實心、藥芯焊絲(Creep Resistant Low-Alloyed Steels GTAW rods/wires, GMAW

產品牌號	類別	分類標準及標號
產品牌號	類別	AWS A5.28:	EN…
Union I Mo	GTAW	ER80S-G	1668： 12070：	W2Mo W MoSi
Union I Mo*	GMAW	ER80S-G	440： 12070：	G2Mo G MoSi
Thyssen MV Mo*	MCAW	ER80C-G H4	758： 12071：	T 46 2 Mo M M 2 H5 T Mo MM 2 H5

*：保護氣體為M21（氬氣+15至25%CO2）

產品牌號	類別	分類標準及標號
產品牌號	類別	AWS A…		EN…
Union I CrMo	GTAW	5.28:	ER80S-G	12070:	W CrMo 1 Si
Union I CrMo*	GMAW	5.28:	ER80S-G	12070:	G CrMo 1 Si
Thyssen MV CrMo	MCAW	5.28:	E80C-B2 H4	12071:	T CrMo1 MM2 H5
Union I CrMo 910	GTAW	5.28:	ER90S-G	12070:	W CrMo 2 Si
Union I CrMo 910*	GMAW	5.28:	ER90S-G	12070:	G CrMo 2 Si
Union I Cr 2 WV	GTAW	5.28:	ER90S-G	12070:	W ZCrWV2
Union I Cr 2 WV*	GMAW	5.28:	ER90S-G	12070:	G ZCrWV2
Union I CrMoVTi B	GTAW	5.28:	ER90S-G	12070:	W ZCrMoV2
Union I CrMoVTi B*	GMAW	5.28:	ER90S-G	12070:	G ZCrMoV2
Union I CrMo 5	GTAW	5.28:	ER80S-B6	12070:	W CrMo 5 Si
Union I CrMo 5*	GMAW	5.28:	ER80S-B6	12070:	G CrMo 5 Si
Thermanit MTS 3	GTAW	5.28:	ER90S-B9	12070:	W CrMo 9 1
Thermanit MTS 3*	GMAW	5.28:	ER90S-B9	12070:	G CrMo 9 1
Thermanit MTS 3 FD*	MCAW	5.28:	E90C-B9 H4	12071:	T ZM M 2 H5
Thermanit MTS 4 Si	GTAW	-	-	12070:	W CrMoWV 12 Si
Thermanit MTS 4 Si*	GMAW	5.9:	≈ER505	12070:	G CrMoWV 12 Si
Thermanit MTS 616	GTAW	5.28:	ER90S-G	12070:	W Z CrMoWVNb 9 0.5 1.5
Thermanit MTS 616*	GMAW	5.28:	ER90S-G	12070:	G Z CrMoWVNb 9 0.5 1.5
Thermanit MTS 911	GTAW	5.28:	ER90S-G	12070:	W Z CrMoWVNb 9 1 1
Thermanit MTS 911*	GMAW	5.28:	ER90S-G	12070:	G Z CrMoWVNb 9 1 1

美國林肯焊材產品

Fleetweld? 5P+   E6010 用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充、蓋面焊
Supra?      E6012用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Panta?      E6013用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Pantafix   E6013用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Omnia?   E6013用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Omnia? 46  E6013用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Omnia? 46+  E6013用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Cumulo?     E6013用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Universalis?  E6013用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充
Ferrod 165A   E7024-1 用于平焊及橫角焊，在手工焊或重力焊時具有良好的焊接工藝性能
Ferrod 135T   E7024用于平焊及橫角焊，在手工焊或重力焊時具有良好的焊接工藝性能
Ferrod 160T   E7024用于平焊及橫角焊，在手工焊或重力焊時具有良好的焊接工藝性能
Gonia 180    E7024用于平焊及橫角焊，在手工焊或重力焊時具有良好的焊接工藝性能
Baso? 48 SP  E7018-1 H8用于低溫鋼結構的對接焊及角焊，該焊條符合AWS A5.1E7018-1
Baso? 49    E7018 H4難吸潮超低氫焊條，低溫韌性好，可用于鍋爐、壓力容器等焊接
Baso? 51P   E7018-1用于低溫鋼結構的對接焊及角焊，該焊條符合AWS A5.1E7018-1
Baso? 100   E7016 H4R低氫型焊條全位置焊接性能好，用于X80鋼管的根焊（上坡焊）。
Baso? 120   E7018 H4R難吸潮超低氫焊條，低溫韌性好，可用于鍋爐、壓力容器等焊接
Baso? G     E7018-1 H4R難吸潮超低氫焊條，低溫韌性好，可用于鍋爐、壓力容器等焊接
Baso? 26V   E 7048 H8用于管道的對接焊.向下立焊時焊接工藝性能優良，焊縫金屬具有良好的力學性能
Conarc? 48   E7018-1 H4R難吸潮超低氫焊條，低溫韌性好，可用于鍋爐、壓力容器等焊接
Conarc? 49   E7018 H4R難吸潮超低氫焊條，低溫韌性好，焊接重要結構
Conarc? 49C  E7018-1 H4R難吸潮超低氫焊條，低溫韌性好，可用于鍋爐、壓力容器等焊接
Conarc? 51   E7016-1 H4R低氫型焊條全位置焊接性能好，用于X80鋼管的根焊（上坡焊）
LINCOLN? 7018-1  E7018-1用于低溫鋼結構的對接焊及角焊
Conarc? L150   E7028 H4R用于橫角焊,烘干:70～100℃×0.5～1h
Conarc? V180   E7028 H4R用于橫角焊,烘干:70～100℃×0.5～1h
Kardo?     E6018該焊條是典型的鈦鈣型焊條
Shield Arc? HYP+  E 7010-P1尤其適用于鋼種為X56和X60或L385M/L415MB的管材
Shield Arc? 70+    E8010-G纖維素焊條，可用于X56到X70鋼大直徑管線焊接
Shield Arc? 90    E 9010-G保證焊縫熔敷金屬的優良機械性能、最高金相質量和可靠性
Shield Arc? 6P+   E6010用于垂直下向焊接直流負極的根焊再接直流正極的熱焊、填充、蓋面焊
Shield Arc? 7P+    E7010-P1/E7010-G尤其適用于鋼種為X56和X60或L385M/L415MB的管材
Shield Arc? 8P+    E8010-P1是最常用且適應性強纖維素焊條，它能極其充分地滿足橫貫國家的管道實地焊接的各種嚴格的要求
Conarc? 55CT    E8018-W2-H4R焊接HY80、HY90、T-1等高強鋼
Conarc? 60G     E9018M-H4焊接HY80、HY90、T-1等高強鋼
Conarc? 70G   E9018-G-H4焊接HY80、HY90、T-1等高強鋼
Conarc? 80   E11018M-H4焊接Mn-Mo型鋼，壓力容器部件或鑄鋼件
Conarc? 85   E12018-G-H4R焊接相應強度的低合金鋼結構
Kryo? 1     E7018-G-H4R耐大氣腐蝕性能優良，用于橋梁，鐵路，港口機械等鋼結構的焊接
Kryo? 1N    E8016-G-H4R耐吸潮超低氫焊條，焊接低溫鋼，力學性能優良，適合厚板重要結構
Kryo? 1P    E8018-G-H4R耐吸潮超低氫焊條，焊接低溫鋼，力學性能優良，適合厚板重要結構
Kryo? 1-180   E8018-G-H4R耐吸潮超低氫焊條，焊接低溫鋼，力學性能優良，適合厚板重要結構
Kryo? 2    E9018-G-H4R超低氫焊條，抗裂性能優良，用于焊接屈服強度610Mpa的高強鋼
Kryo? 3    E8018-C1-H4低溫鋼焊條，焊接3.5Ni鋼，焊態和熱處理后力學性能優良
Kryo? 4    E7016-C2L-H4R用于焊接0.5%Mo鋼，也可用于管線焊接
SL?12G    E7018-A1-H4R用于焊接0.5%Mo鋼，也可用于管線焊接
SL?19G    E8018-B2-H4焊接和堆焊Cr:1.25,Mo:0.5鉻鉬鋼，適合STC（步冷熱處理）焊接
SL?19G(STC)   E8018-B2-H4焊接和堆焊Cr:1.25,Mo:0.5鉻鉬鋼，適合STC（步冷熱處理）焊接
SL?20G        E9018-B3-H4焊接和堆焊Cr:2.25-Mo鉻鉬鋼，適合STC（步冷熱處理）焊接
SL?20G(STC)    E9018-B3-H4焊接和堆焊Cr:2.25-Mo鉻鉬鋼，適合STC（步冷熱處理）焊接
SL?22G      E8018-B1-H4焊接和堆焊Cr:1.25,Mo:0.5鉻鉬鋼
SL?502      E8018-B6-H4R焊接和堆焊Cr:4-6%,Mo:0.5鉻鉬鋼
SL?9Cr(P91)  E9016-B9-H4焊接和堆焊Cr:8-11%,Mo:2鉻鉬鋼，焊接P91.T91鋼
不銹鋼焊條

Arosta? 304L    E308L-16 用于焊接低碳含18%鉻-8%鎳鋼
Limarosta? 304L  E308L-17
Vertarosta? 304L  E308L-15 C:≤0.040,Si:≤0.40,Mn:1.3,Ni:10.0,Cr:20.0,Mo≤0.20, σb:≥520,σs:≥350,δ5:≥35%,Akv:≥80(+20℃)，α相:4-8%,抗裂性能和機械性能優良
Jungo? 304L     E308L-15 C:≤0.040,Si:≤0.40,Mn:1.3,Ni:10.0,Cr:20.0,Mo≤0.20, σb:≥520,σs:≥350,δ5:≥35%,Akv:≥80(+20℃)，α相:4-8%,抗裂性能和機械性能優良
Limarosta? 304L-130  E308L-17
Arosta? 347    E347-16 C:0.02,Si:0.9,Mn:0.85,Ni:10.3,Cr:20.0,Nb:0.7,σb:650,σs:490,δ5:33%,Akv:75(+20℃),α相:10%，工藝性能優良，焊接含或不含Ti.,Nb奧氏體不銹鋼

Jungo? 347     E347-15
Arosta? 316L   E316L-16 C:0.022,Si:0.6,Mn:1.3,Ni:12,Cr:19.2,Mo:2.2,σb:570,σs:430,δ5:38%,Akv:40(-101℃),α相:7%,力學性能和工藝性能優良，特別適合管道焊接

Arosta? 316LP  E316L-16 C:0.022,Si:0.6,Mn:1.3,Ni:12,Cr:19.2,Mo:2.2,σb:570,σs:430,δ5:38%,Akv:40(-101℃),α相:7%,力學性能和工藝性能優良，特別適合管道焊接

Limarosta? 316L  E316L-17超低碳型316,用于常溫下耐硫化物液體和化合物腐蝕,不用于400℃以上高溫
Vertarosta? 316L  E316L-15超低碳型316,用于常溫下耐硫化物液體和化合物腐蝕,不用于400℃以上高溫
Jungo? 316L     E316L-15超低碳型316,用于常溫下耐硫化物液體和化合物腐蝕,不用于400℃以上高溫
Limarosta? 316L-130  E316L-17超低碳型316,用于常溫下耐硫化物液體和化合物腐蝕,不用于400℃以上高溫
Arosta? 318     E318-16  18Cr-12Ni-2Mo-Ti鋼用
Jungo? 318      E318-15  18Cr-12Ni-2Mo-Ti鋼用
Arosta? 4439
Jungo? 4455    E316LMn-15  18Cr-12Ni-2.5Mo鋼-196℃極低溫用
Jungo? 4465    E310Mo-15  25Cr-20Ni-2.5Mo鋼用，異材焊接用
Jungo? 4500    E385-16 C:0.02,Si:0.4,Mn:1.3,Ni:25.,Cr:20,Mo:4,Cu:1.7,σb:550,σs:370,δ5:35%,Akv:70(+20℃),純奧氏體不銹鋼焊條，抗熱硫酸，冷鹽酸，和點腐蝕性能非常好，焊接904等不銹鋼

Arosta? 4462     E2209-16 C:0.016,Si:1.0,Mn:1.6,Ni:9.0,Cr:22.8,Mo:3.2,N:0.16,σb:810,σs:700,δ5:22%,Akv:50(-40℃),σ相:40%,雙相鋼焊條，抗拉強度高，抗點腐蝕和抗CI離子腐蝕性能優良

Jungo? 4462     E2209-15 C:0.016,Si:1.0,Mn:1.6,Ni:9.0,Cr:22.8,Mo:3.2,N:0.16,σb:810,σs:700,δ5:22%,Akv:50(-40℃),σ相:40%,雙相鋼焊條，抗拉強度高，抗點腐蝕和抗CI離子腐蝕性能優良

Jungo? Zeron 100X  E2595-15超雙相不銹鋼 RA2507， UNS S39275
Jungo? 309L    E309L-15 C:≤0.04,Si:0.7,Mn:1.0,Ni:13.0,Cr:23.0,Mo:≤0.5,σb:≥520,σs:≥350,δ5:≥30%,Akv:≥60(20℃),α相：8—13%,抗裂性能優良，焊接相應級別的不銹鋼或異種鋼

Arosta? 309S    E309L-16 C:0.025,Si:0.5,Mn:1.4,Ni:13,Cr:23.5,σb:580,σs:460,δ5:35%,Akv:55(20℃),σ相:9%,性能優良，焊接或堆焊相應級別的不銹鋼或異種鋼

Limarosta? 309S  E309L-17同類型不銹鋼、異種鋼以及高鉻鋼、高錳鋼用
Arosta? 309Nb   E309Nb-16 22Cr-12Ni-2.5Mo鋼與碳鋼，異材焊接用。
Arosta? 309Mo  E309LMo-16低C-22Cr-12Ni-2.5Mo鋼與碳鋼，異材焊接用
Nichroma    E308LMo-16低C-18Cr-8Ni鋼用
Nichroma 160   E309Mo-26 22Cr-12Ni-2.5Mo鋼與碳鋼，異材焊接用
Arosta? 329
Limarosta? 312  E312-17 29Cr-9Ni鑄鋼用，異材焊接用
Arosta? 307     E307-16非磁性鋼用,高錳鋼及碳鋼異材焊接用
Jungo? 307     E307-15非磁性鋼用,高錳鋼及碳鋼異材焊接用
Arosta? 304H   E308H-16高C-18Cr-8Ni鋼用
Arosta? 309H   E309H-16同類型不銹鋼、異種鋼以及高鉻鋼、高錳鋼用
Intherma? 310   E310-16 C:0.10,Si:0.75,Mn:1.70,Ni:21.0,Cr:27.0,σb:580,σs:30%,Akv:65(+20℃)，純奧氏體不銹鋼焊條，性能優良，焊接相應級別的不銹鋼

Intherma? 310B  E310-15焊接HK級耐熱鑄造合金,鋼鐵石化高溫應用
NiCro 31/27    E383-16熔敷金屬耐磷酸和有機酸腐蝕性能良好，在硫酸中的腐蝕速率極底，同時在含有氯離子介質中有良好的抗應力腐蝕、縫蝕和點蝕性能。
鎳基合金焊條

NiCro 60/20   ENiCrMo-3INCONEL625 、 INCOLOY825 、 INCO25-6Mo 以及 MONEL400 合金的焊接；鎳基合金與不銹鋼異種材料間的焊接；表面堆焊
NiCro 70/15   ENiCrFe-2抗蠕變接頭的焊接、異種材料焊接；馬氏體鋼、鐵素體鋼和高鎳合金的焊接，含鎳 9 ％合金鋼焊接
NiCro 70/15Mn ENiCrFe-3INCONEL600 、 601 合金和 INCOLOY800 合金自身以及和它們與碳鋼或不銹鋼之間的焊接；鋼的表面堆焊
NiCro 70/19    ENiCrFe-2抗蠕變接頭的焊接、異種材料焊接；馬氏體鋼、鐵素體鋼和高鎳合金的焊接，含鎳 9 ％合金鋼焊接
NiCroMo 60/16  ENiCrMo-4 NCO C-276 及其它 Ni-Cr-Mo 耐腐蝕合金的焊接；表面堆焊合金鋼的焊接、鋼的表面堆焊
NiCroMo 59/23  ENiCrMo-13用于焊接 ALLOY 59 低碳鎳鉻鉬合金，硅、碳含量極低，無焊后開裂敏感性
NiCu 70/30    ENiCu-7 MONEL 400 合金自身的焊接；以及 MONEL 400 合金與鋼的焊接；用于鋼的表面堆焊
Nyloid 2   ENiCrMo-6鎳基合金焊條型號NiCr14Mo7,耐磨腐蝕,耐高溫,耐磨耗,用于雙相鋼,不銹鋼及鑄鋼表面的堆焊

在線詢盤/留言

*您的姓名：

*聯系手機：

*固定電話：

*聯系郵箱：

*所在單位：

*需求數量：

咨詢內容：

您要求給廠家提供：