德國soudokay SK A45-S高合金鋼藥芯焊絲代理商

備注：一口價為一公斤的價格

拍下時請注明規格 0.8/1.0/1.2/1.4/1.6

 

SK A45-S high alloyed steels
Classifications SAW cored wire
DIN 8555
UP 10-GF-65-GT
Characteristics
Chromium-Niobium-Molybdenum alloy with addition of Tungsten and Vanadium designed to
resist high stress grinding abrasion with low impact and solid erosion at service temperatures
up to 650 °C. The deposits will readily show stress relief cracks.
Microstructure: Complex carbides and Nb nodular carbides in an austenitic
matrix
Machinability: Grinding only
Oxy-acetylene cutting: Cannot be flame cut
Deposit thickness: 8 to 12 mm in 2 or 3 layers
Welding flux: Record SA, Record SR
Field of use
Wear plates, sinter finger crushers, exhaust fan blades in pellet plants, perlite crushers,
bucket teeth and lips on bucketwheel excavators, Boiler fan blades, burden area in blast
furnace bells, etc.
Typical analysis in %
C Mn Si Cr Mo Nb W V Fe
5,1 0,2 0,6 21,5 5,4 5,7 1,9 0,95 balance
Typical mechanical properties
Hardness as welded: 64 HRC
Form of delivery and recommended welding parameters
Wire diameter
(mm)
Amperage Voltage Stick-Out Flux-Rate Travel Speed
(cm/min)
3,2 325 – 380 26 – 32 30 – 35 1,1 35 – 45

品牌：德國soudokay