商鋪名稱：濟南銀箭焊接材料有限公司
聯系人：馬經理（先生）
聯系手機：
固定電話：
企業郵箱：mingquanhc@163.com
聯系地址：山東省濟南市歷下區五金市場8號
郵編：250002
聯系我時，請說是在焊材網上看到的，謝謝！
UTP UP 73 G 2 anti-wear
Classifications SAW solid wire
EN 14700 DIN 8555 Material-No.
SZ Fe8 UP 3-GZ-50-T Special Alloy
Characteristics and field of use
The SAW wire UTP UP 73 G 2 is used for high wear resistant buildups on construction parts
and tools subject to high abrasion and pressure in combination with medium impact loads
at elevated performance temperatures, e.g. forging tools, roll mandrills, mangle rolls, thrust
rolls as well as for the production of high-grade work surfaces made of non- or low alloyed
base materials.
Machinable by grinding or hard metal alloys.
Hardness of the pure weld deposit:
untreated: 48 – 52 HRC
tempered 550 °C: approx. 55 HRC
Typical analysis in %
C Si Mn Cr Mo Ti Fe
0,35 0,3 1,2 7,0 2,0 0,3 balance
Welding instruction
Clean welding area to metalic bright. Preheat massive construction parts and tool steels to
250 – 400 °C, if necessary stress relief annealing at 550 °C. Slow cooling.
Form of delivery and recommended welding parameters
Wire diameter (mm) Amperage Voltage Travel Speed (cm/min)
3,0* 400 – 500 28 – 30 30 – 50
