商鋪名稱：青島眾誠機床成套設備有限公司
聯系人：陶生（先生）
聯系手機：
固定電話：
企業郵箱：qdzcjc@163.com
聯系地址：青島重慶中路藍山灣1
郵編：266000
聯系我時，請說是在焊材網上看到的，謝謝！
>數控系統編程采用ISO國際代碼，鍵盤手動輸入，并配有RS232通信接口，設有斷電保護和各種自診斷功能 The machine adopts ISO international code and Keyboard Manual Data Input,It is also provided with programs of power cut-off protection and the functions of automatic diagnosis,and with Rs232infer-face.
> 車床縱橫向由伺服電機驅動，精密滾珠絲杠傳動.Longitudinal and cross feeds are effected by servomotor drive through ball screws.
> 刀架有四工位、六工位、立式或臥式可供選用，采用精密度端齒盤定位，也可選用排刀，重復定位精度高。Either vertical or horizontal 4-station or 6-station tool postor gang tools can be selected.The post is located on precision contrate gears with ahigh repeated positioning accuracy.
> 卡盤和尾座有液壓、手動可供選擇 Both chuck and tailstock are supplied with hydraulic or manual type.
> 數控車床床身導軌經超音淬火后精磨而成，使用壽命更長，精度高The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
> 主軸通孔Φ80mm，主軸系統剛性好。主軸為變頻無級調整。The spindle bore size is 80mm.The spindle system is high in the rigidity and accuracy,An invertor is used to realize variable speed.更多詳細內容可訪問www.qdzcjc.com 官網
