廈門紀揚科技有限公司形成了以自動化設備研發與貿易服務為主營業務，結合進出口貿易服務及技術服務的一站式工業自動化設備服務商。目前，主要業務領域范圍涉及機械、煤礦、電力、冶金、建材、石化、輕紡、
市政工程等幾十個行業。公司與上游400多家合作伙伴，包括法國施耐德、日本OMRON、德國西門子、瑞典ABB 、伊頓 、GE、德國KUKA等世界著名工控產品廠商合作密切，并建立了長期穩定的技術和商務合作關系
。
液壓、低壓、高壓，元器件、儀表。傳感器、泵、閥、接觸器、工業液體、工業油漆、開關.....歐美進口的工業設備配件。石油、海油、鋼鐵廠、電廠、化工廠、鋁廠、
Part number: A-1051-1300 : 廈門紀揚19,027 Note: Adjustable base, legs and cable sold separately (see page 1-49). Horizontal mounting kit Includes: 1 × adjustable rack base 2 × 200 mm legs 2 ×
screws Part number: A-1051-0441 : 廈門紀揚368 Vertical mounting kit Includes: 1 × support plate 8 × support pins (short) 8 × support pins (long) Part number: A-1051-1308 : 廈門紀揚87
ACC2-2 autochange controller Data transmission: Serial (RS232) User-definable parameters: Baud rate 300–19200 Voltage range: 85 V–135 V, 170 V–275 V, 50/60 Hz automatic selection
Dimensions: Height 88 mm (3.46 in) Width 290 mm (11.42 in) Depth 220 mm (8.66 in) Part number: A-1520-0101 : 廈門紀揚2,959
ACR1 autochange system accessoriesAdjustable rack base : 廈門紀揚315Part number: A-1051-0440 Leg (100 mm) : 廈門紀揚13Part number: M-1051-0147 Leg (200 mm) : 廈門紀揚24
Coordinate measuringPart number: M-1051-0148 machine probesPort replacement kits 1-49All kits contain four ports. : 廈門紀揚265Short port replacement kit : 廈門紀揚255Part number: A-
5036-0049 : 廈門紀揚255Long port replacement kitPart number: A-1051-7077 Mixed port replacement kitContains two short and two long ports.Part number: A-1051-7076 ACR1 autochange
system cablesPL19 5 m cable : 廈門紀揚212Part number: A-1051-0199 PL20 10 m cable : 廈門紀揚352Part number: A-1051-0045 PL21 15 m cable : 廈門紀揚461Part number: A-1051-0102 PL40 30
m cable : 廈門紀揚899Part number: A-1054-0002
ACR3 autochange rack The ACR3 forms part of the modular rack system (MRS) and is an autochange rack for probes and extension bars that incorporate the Renishaw autojoint. The ACR3 is a four-
port mechanical design that traverses the MRS rail. Driven by the motion of the CMM, it locks and unlocks the autojoint between the probe and the probe head. ACR3 4-port rackCoordinate
measuring Part number: A-5036-0005 : 廈門紀揚9,589 machine probes Note: For 8-port applications, two 4-port racks can be connected together. The 8-port configuration requires the use of either the
MRS kit 2 or MRS kit 3 (see below).1-50 MRS kits Include: MRS rail (see below) MRS feet (2) 125 mm legs (4) Step back adaptors (2) The MRS rail is available in 400 mm, 600 mm and 1000?mm lengths.
MRS kit 1 : 廈門紀揚1,205 400 mm long rail. Part number: A-4192-0001 MRS kit 2 : 廈門紀揚1,292 600 mm long rail. Part number: A-4192-0002 MRS kit 3 1000 mm long rail. Part number: A-
4192-0003 : 廈門紀揚1,400 Note: The MRS kits are compatible with FCR25, SCP600 and ACR3. MRS rails : 廈門紀揚205 : 廈門紀揚269 Part number: A-4192-0050 (400 mm) : 廈門紀揚376 Part
number: A-4192-0051 (600 mm) Part number: A-4192-0052 (1000 mm)
ACR3 components : 廈門紀揚1,400 Coordinate measuring : 廈門紀揚86 machine probesSCP600 : 廈門紀揚102 1-51Stylus change port for SP600.Part number: A-2098-0933 : 廈門紀揚364 : 廈門紀揚
376MRS legs : 廈門紀揚151Part number: A-4192-0061 (62.5 mm) : 廈門紀揚151Part number: A-4192-0053 (125 mm) : 廈門紀揚151MRS heavy duty leg kit : 廈門紀揚13?60?mm × 350?mm long.
One leg per kit.Part number: A-4192-0020 MRS adjustable foot platePart number: A-4192-0702 MRS leg and foot adaptorPart number: A-4192-0055 MRS fixed footPart number: A-4192
-0056 MRS step back adaptorPart number: A-4192-0058 M8 T nut *Part number: P-NU18-0005 *
Manual autojoint probe stand Renishaw’s manual autojoint probe stand (MAPS) is a low- cost storage rack capable of holding up to six combinations of probes, extension bars, and accessories. The
stand can be mounted directly on the table of a CMM using the appropriate socket head bolt (maximum size M10, 3/8 in) which is passed through the center of the base.Coordinate measuring
Standard autochange rack legs (100 mm and 200 mm long) are machine probes compatible with this stand and can be stacked to accommodate longer probe extensions with longer stylus
extensions. As an alternative to the support pillar, a wall mounting bracket is available to enable the stand to be mounted to a cabinet, wall or any other vertical surface. Height: 285 mm Depth: 80
mm Width: 235 mm1-52 Part number: A-1071-0001 : 廈門紀揚222 MSR1 rack The MSR1 rack is intended for use on either manual or DCC CMMs to hold pre-qualified stylus assemblies fitted to
TP20 or TP200 probe modules. The rack provides convenient storage and protects the kinematic coupling mechanism from contamination. Overall height: 285 mm Depth (inc wall bracket):
86 mm Width: 236 mm MSR1 with leg and base (wall mount kit included) Part number: A-1371-0347 : 廈門紀揚404
Datum sphereThe Renishaw universal datum sphere enhances the performance of manual and fullyautomated CMMs. It allows for quick and easy adjustment to set ball stem over a wide rangeof
probe datuming angles. This enables datuming above, centrally and below the ball. Eachdatum sphere is supplied with its own certificate, giving ball diameter and roundness. Allsphere
measurements are performed on equipment traceable to UK (NPL) standards.Specifications: Hard-wearing tungsten carbide sphere (ball) available in Coordinate measuring five sizes machine
probesMetric: ?12 mm, ?19 mm and ?25 mmInch: ?3/4 in and ?1 inSphericity: to within 0.1 μm (0.000004 in)Diametric tolerance: ±1 μm (0.00004 in)Datum sphere kitIncludes: 1 datum
ball (selected by size) 1-53 Pivot pillar Base C spanner Ball certificate Storage boxDescription Part number ?12 mm ball ?19 mm ball A-1034-0028
廈門紀揚545?25 mm ball ?? in ball A-1034-0027 廈門紀揚545?1 in ball A-1034-0026 廈門紀揚545 A-1034-0031 廈門紀揚545 A-1034-0035 廈門紀揚545Datum sphere fixing
studsA fixing stud is required with each kit to attach the pillar to the table surface. Select one fromthe list below.Description Manufacturer Part number M6 × 1 M-1034-0016 廈門紀揚
27M8 × 1.25 MTI M-1034-0015 廈門紀揚27M10 × 1.5 B&S, LK Tool & Sheffield M-1034-0014 廈門紀揚275/16–18 UNC M-1034-0018 廈門紀揚273/8–16 UNC Carl Zeiss,
Fanamation, LK Tool, & L.S. Starrett M-1034-0017 廈門紀揚27Datum sphere accessories (M6 thread – stem is attachedto the ball)Description Part number ?12 mm datum ball
A-1034-0005 廈門紀揚335?19 mm datum ball A-1034-0023 廈門紀揚335?25 mm datum ball A-1034-0002 廈門紀揚335?? in datum ball A-1034-0032 廈門紀揚335?1 in datum ball A-1034
-0036 廈門紀揚3352 way adaptor M-1034-0042 3 way adaptor * M-1034-0052 廈門紀揚82Pillar extension 75 mm (2.96 in) long M-1034-0019 廈門紀揚186 廈門紀揚82*
Mahogany boxes Probe head boxes Part number Description A-1015-7725 廈門紀揚100 PH1 probe head, cable, TK6 box PH6 probe head, TP2 probe, stylus, TK6 box A-1015-
7731 廈門紀揚100 PH5 or PH5-1 probe head, cable, TK6 box PH10M probe head kit box A-1015-7727 廈門紀揚100 PH6A probe head kit box TP1 probe and stylus box (PC10) A-1015
-7698 廈門紀揚108 MIH and accessories box TP200 probe and stylus box A-1015-7674 廈門紀揚198Coordinate measuring A-1015-7686 廈門紀揚136 machine probes A-1015-7765
廈門紀揚113 A-1015-7869 廈門紀揚1351-54 Extension bar boxes Part number Description A-1015-7694 廈門紀揚113 PEL extension bars (PC19) PEM extension bars
A-1015-7761 廈門紀揚131 Probe extension kits Kit EKL Part number: A-1047-7005 : 廈門紀揚994 Description Quantity Part number Lightweight extension bar (50 mm) PEL1 1
A-1047-3484 Lightweight extension bar (100 mm) PEL2 1 A-1047-3485 Lightweight extension bar (200 mm) PEL3 1 A-1047-3486 Double-ended spanner 1 A-1047-3932 Box
1 A-1015-7694 PEM Kit Part number: A-1076-0100 : 廈門紀揚3,305 Description Quantity Part number Multiwire extension bar (50 mm) PEM1 1 A-1076-0070 Multiwire
extension bar (100 mm) PEM2 1 A-1076-0071 Mulitwire extension bar (200 mm) PEM3 1 A-1076-0072 Joint key 1 A-1051-0040 Box 1 A-1015-7761
Stylus toolsS1 C spanner (for use with TP20 probe body)Part number: A-1042-1486 : 廈門紀揚19S3 hex key 1.5 mm A/F : 廈門紀揚4Part number: P-TL01-0150 S4 hex key 3.0 mm straight arm : 廈門
紀揚4 Coordinate measuringPart number: P-TL01-0300 machine probesS5 wrench 2 mm A/F : 廈門紀揚4Part number: P-TL01-0200 S6 hex key 2.5 mm A/F 1-55Part number: P-TL01-0250 : 廈門紀
揚4S7 stylus tool (for use with M2 and M3 styli)Part number: M-5000-3540 : 廈門紀揚9S9 double-ended spanner : 廈門紀揚14Part number: A-1047-3932 S10 joint key (for use with autojoint)Part
number: A-1051-0040 : 廈門紀揚17S12 hex key 0.9 mm A/F : 廈門紀揚4Part number: P-TL01-0089 S20 torque tool (for use with carbon fiber stylus)Part number: A-5003-2300 : 廈門紀揚48M4
stylus tool (for use with M4 and M5 styli)Part number: M-5000-3707 : 廈門紀揚12Stylus tool (for use with adaptor M-5000-9301)Part number: M-5000-9304 : 廈門紀揚15
Tool kits TK1 tool kit The TK1 tool kit is included with the MP1, MP3, MP4, MP7, MP8, MP9, MP10, MP11, MP12, MP14, MP700, and LP2 probes.Coordinate measuring Includes: Stylus tool ?1.98
mm machine probes Hex key 1.5 mm A/F Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F Hex key 4.0 mm A/F Part number: A-2053-7531 : 廈門紀揚36 TK3 tool kit The TK3 tool kit is
included with the M6-3 probe.1-56 Includes: Stylus tool ?1.98 mm Hex key 1.5 mm A/F Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F Hex key 4.0 mm A/F Hex key 5.0 mm A/F Part
number: A-2027-7046 : 廈門紀揚36 TK4 tool kit : 廈門紀揚24 Includes: S7 stylus tool (2) Hex key 1.5 mm A/F Hex key 2.5 mm A/F Part number: A-1041-7041 TK5 tool kit : 廈門紀揚62
Includes: S7 stylus tool (2) S8 spanner C spanner Double-ended spanner Hex key 1.5mm A/F Part number: A-1042-7030 TK6 tool kit : 廈門紀揚7 Includes: Hex key 2.0 mm A/F Hex key 2.5 mm
A/F Hex key 3.0 mm A/F Part number: A-1042-7031 TK7 tool kit : 廈門紀揚28 Includes: Joint key S7 stylus tools (2) Hex key 1.5 mm A/F Part number: A-1039-0041
CMM metrology softwareMODUS? Coordinate measuring machine probesRenishaw’s new MODUS? softwareprovides a powerful platform for 3-axis and 1-575-axis measurement. A configurable
userinterface allows native DMIS programs tobe developed online or offline, drawinggeometry, embedded dimensions andtolerance data from CAD, with fullsimulation and collision detection.
Thesoftware includes certified algorithms forfeature measurement, feature constructionand part alignment.? Full support for I++ DME compliant metrology controllers, including Renishaw’s UCC
range of universal CMM controllers? Full compatibility with REVO? and PH20? CAD-driven online / offline programming? Full motion simulation and collision detection, including 5-axis moves?
Native DMIS support? Certified mathematical algorithms? Powerful text and graphical reporting? Flexible output of results data including certified Q-DASMODUS? MODUS?
Offline*MODUS? – 3-axis and 5-axis touch-trigger MODUS? – Offline 3-axis and 5-axis touch- triggerPart number: A-5639-0001 : 廈門紀揚8,800 Part number: A-5639-0101 : 廈門紀揚
4,400MODUS? – 3-axis scanning MODUS? – Offline 3-axis scanningPart number: A-5639-0003 : 廈門紀揚12,800 Part number: A-5639-0103 : 廈門紀揚6,400MODUS? – 5-axis scanning MODUS? –
Offline 5-axis scanningPart number: A-5639-0005 : 廈門紀揚20,800 Part number: A-5639-0105 : 廈門紀揚10,400 Offline – Graphical reporting Part number: A-5639-0007 : 廈門紀揚1,600*
The online version of MODUS? can also be run offline Options without the need to purchase MODUS? Offline. Only purchase MODUS? Offline if you require a dedicated offline Renishaw offers
multiple application-specific analysis packages seat of MODUS?. including Modus Gear, Modus Spline and Modus Airfoil. These are chargeable modules added to a base package of Modus 3-axis or
5-axis. Please contact Renishaw for details.
CAD integration options Renishaw services In addition to the native IGES and STEP support, MODUS? offers Renishaw has set up a series of part numbers which a wide range of CAD options including
VDA-FS, STEP, CATIA? (v5 should be referenced when ordering Renishaw services. and v4), Unigraphics?, Parasolid?, Pro/E? and SolidWorks?. For These part numbers will appear on your invoice. a
complete list and pricing of CAD import / export options please contact Renishaw sales. Part number Description RI-6002-0001 CMM hourly labor 廈門紀揚150/hour Software
maintenance agreements RI-6002-0002 CMM hourly travel 廈門紀揚75/hour RI-6002-0003 CMM expenses as incurred Every new purchase of MODUS? comes with one year’s free
RI-6002-0004 CMM in-house training 廈門紀揚450/day software updates, maintenance and support. After the first year,Coordinate measuring one-year maintenance agreements can be
purchased for MODUS? machine probes and its software options. Please contact Renishaw sales for details. MODUS? training at Renishaw Inc Charge per student.1-58 4 days Part number: A-5639-
1701 : 廈門紀揚3,000 3 days Part number: A-5639-1700 : 廈門紀揚2,250 2 days Part number: A-5639-1702 : 廈門紀揚1,500 1 day Part number: A-5639-1703 : 廈門紀揚750 Onsite MODUS?
training Up to four people, all inclusive of expenses. 4 days Part number: RI-A-5639-1701 : 廈門紀揚9,625 3 days Part number: RI-A-5639-1700 : 廈門紀揚7,700 2 days Part number: RI-A-5639
-1702 : 廈門紀揚5,775 1 day Part number: RI-A-5639-1703 : 廈門紀揚3,850 MODUS? training block : 廈門紀揚680 Part number: A-5639-2500
Section 2Machine tool probes
Inspection probes for machining centers MP11 The MP11 is a hard-wired probe ideal for small machine tools with manual tool changing. The probe is mounted in the machine spindle with the signal
transmission cable connected to the machine control. With the MP11, the illuminated LED switches off every time the probe stylus contacts the workpiece.Machine tool probes Sense directions ±X,
±Y, +Z Stylus overtravel X and Y: ±17.5° Z: 8 mm (0.31 in) Stylus trigger force X and Y: 50 gf – 150 gf Unidirectional repeatability Z: 180 gf – 700 gf 1.0 μm (0.00004 in) MP11 retrofit kit2-2 Includes:
MP11 probe with cable and connectors Remote socket kit 50 mm and 100 mm ceramic styli MP11 probe Renishaw Inspection Plus software Installation and applications support Includes: MP11
probe with cable and connectors A shank is not included in this kit. See the section entitled Part number: A-2045-0001 : 廈門紀揚3,079 Shanks and Toolholders for and part number information.
Part number: MP11-NS-S (Available at fixed ) MP11 replacement parts Call for details Spare MP11 cable Note: The retrofit questionnaire at the end of this section must Part number: A-2045-0051
be filled out and returned to Renishaw before a retrofit order can be processed. : 廈門紀揚132 MP11 hardware only kit 4 pin connector for MP11 cable Includes: MP11 probe with cable and
connectors Part number: MP11 PLUG KIT : 廈門紀揚64 Remote socket kit 50 mm and 100 mm ceramic styli A shank is not included in this kit. See the section entitled 4 pin socket for MP11 : 廈門
紀揚60 Shanks and Toolholders for and part number Part number: P-CN21-0304 information. Part number: MP11-NS-KIT : 廈門紀揚3,558 Outer diaphragm kit Part number: A-2051-7105
: 廈門紀揚100
MP15The MP15 probe is used on small CNC machines with limited Z travel andmanual tool changing.The probe is mounted in the machine spindle with the signal transmission cableconnected to the
machine control. With the MP15, the illuminated LED switchesoff every time the probe stylus contacts the work piece.MP15 hard-wired probe kit : 廈門紀揚2,114Part number: A-2116-1802
MP15/MP11 adaptor : 廈門紀揚225 Machine tool probesPart number: M-2116-1356 MI8 interface : 廈門紀揚198Part number: A-2037-0010 2-3
MP700 The MP700 is an optical transmission part probing system for use on machining centers. The MP700 is specifically designed to deliver high-accuracy CMM type probe performance. The MP700
uses strain gage sensors and and an internal microprocessor to provide a solid state sensor mechanism with unprecedented life and reliability. Low trigger force and consistent pre-travel results in
high accuracy with long styli. The MP700 is available with either 35° or 70° output. An M code must be supplied to turn the probe on. An internal timer or M code is used to turn the probe
off.Machine tool probes Sense directions ±X, ±Y, +Z Stylus overtravel X and Y: ±16.5° Z: 11 mm (0.45 in) Stylus trigger force X and Y: 19 gf Unidirectional repeatability Z: 325 gf 0.25 μm (0.00001 in)
MP700 retrofit kit MP700 probe2-4 Includes: MP700 probe with 70° OMP Includes: MP700 probe OMM Adjusting plate Receiver mounting bracket 9?V alkaline battery MI12 interface Tool kit 50?
mm and 100?mm carbon fiber styli Sealtite conduit Part number: A-2107-0035 (35°) : 廈門紀揚4,564 9?V alkaline battery Part number: A-2107-0070 (70°) : 廈門紀揚4,564 TK1 tool kit Renishaw
Inspection Plus software MP700 probe module Installation and applications support Part number: A-2108-0001 A shank is not included in this kit. See the section entitled : 廈門紀揚4,010 Shanks
and Toolholders for and part number information. MP700 OMP only Part number: MP700-NS-S (Available at fixed ) Call for details Part number: A-2107-0036 (35°) : 廈門紀揚849 Part number:
A-2107-0071 (70°) : 廈門紀揚849 Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit order can OMM optical receiver be processed.
MP700 hardware only kit Part number: A-2033-0576 : 廈門紀揚986 Includes: MP700 probe with 70° OMP Receiver mounting bracket OMM Part number: A-2033-0830 : 廈門紀揚119
Receiver mounting bracket MI12 interface MI12 interface : 廈門紀揚931 50?mm and 100?mm carbon fiber styli Part number: A-2075-0142 Sealtite conduit 9?V alkaline battery TK1 tool kit A
shank is not included in this kit. See the section entitled Sealtite conduit Shanks and Toolholders for and part number information. ? in conduit, 5 ft long. Includes one fitting. Part number: MP700-
NS-KIT : 廈門紀揚6,940 Part number: SEALTITE, 7455 : 廈門紀揚23
