MODELVERSIONMPIMAGING SENSOR
|
CMLN-13S2C-CS
|
|
CMLN-13S2M-CS
|
|
|
1.3
MP
|
-
Sony ICX445 CCD, 1/3", 3.75 μm
-
Global Shutter
-
1296x964 at 18
FPS
|
Board level
option available to OEM volume customers; please contact
sales
|
A/D Converter
|
12-bit
|
|
Video Data Output
|
8-bit and 16-bit digital data
|
|
Image Data Formats
|
Y8, Y16 (monochrome), 8-bit and 16-bit Raw Bayer data (color)
|
|
Partial Image Modes
|
Pixel binning and region of interest (ROI) modes
|
|
Image Processing
|
Color/Greyscale conversion, gamma, lookup table, white balance
|
|
Gain
|
Automatic/Manual/One-Push Gain modes
|
|
0 dB to 24 dB
|
|
Gamma
|
0.50 to 4.00
|
|
White Balance
|
Automatic/manual modes, programmable via software
|
|
Digital Interface
|
5-pin Mini-B USB2.0 digital interface for camera control, video data
transmission, and power
|
|
Transfer Rates
|
480 Mbit/s
|
|
GPIO
|
7-pin JST GPIO connector, 4 pins for trigger and strobe, 1 pin +3.3 V, 1
VEXT pin for external power
|
|
External Trigger Modes
|
IIDC Trigger Modes 0, 1, 3, and 14
|
|
Synchronization
|
Via external trigger or software trigger
|
|
Shutter
|
Global Shutter
|
|
Automatic/Manual/One-Push/Extended Shutter modes
|
|
0.01 ms to >10 seconds (extended shutter mode)
|
|
Image Buffer
|
N/A
|
|
Memory Channels
|
3 memory channels for custom camera settings
|
|
Flash Memory
|
256 KB
|
|
Dimensions
|
25.5 mm x 44 mm x 41 mm (excluding lens holder and connectors)
|
|
Mass
|
37 grams (without optics or tripod mounting bracket)
|
|
Power Consumption
|
2 W, 4.745 to 5.25 V via Mini-B USB 2.0 interface or JST 7-pin GPIO
connector
|
|
Camera Specification
|
IIDC v1.31
|
|
Camera Control
|
via FlyCapture SDK, CSRs, or third party software
|
|
Camera Updates
|
In-field firmware updates
|
|
Lens Mount
|
CS-mount (5 mm C-mount adapter included)
|
|
Temperature
|
Operating: 0° to 45°C; Storage: -30° to 60°C
|
|
Emissions Compliance
|
CE, FCC, RoHS
|
|
Operating System
|
Windows XP SP1
|
|
Warranty
|
One year
|
Board level optionavailable to qualified customers.
Development Kit Contents
The following
items are included in the Development Accessory Kit DEVKIT-01-0003:
-
2 meter USB 2.0 cable (Type A to Mini-B 5-pin)
-
ACC-01-3002: GPIO wiring harness
-
Firefly MV and Chameleon Getting Started Manuals
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off or
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE
compliant.
|
The fully redesigned, next generationFlea3camera series builds on the
success of the ultra-compact Flea2 by adding new Sony image sensors to the
line-up and a choice of IEEE 1394b (FireWire) or GigE Vision digital interface.
Measuring just 29 x 29 x 30 mm and weighing only 58 grams, the Flea3 has the
same small, lightweight form factor as many industry-standard “ice cube” analog
cameras. The Flea3 also offers a host of new features, including enhanced
opto-isolated GPIO; an on-camera frame buffer; non-volatile user data storage;
new trigger modes; and improved imaging performance.
|
MODELVERSIONMPIMAGING SENSOR
|
FL3-FW-03S1C-C
|
|
FL3-FW-03S1M-C
|
|
|
0.3 MP
|
-
Sony ICX618 CCD, 1/4", 5.6 μm
-
Global Shutter
-
648x488 at 120 FPS
|
|
FL3-FW-03S3C-C
|
|
FL3-FW-03S3M-C
|
|
|
0.3 MP
|
-
Sony ICX414 CCD, 1/2", 9.9 μm
-
Global Shutter
-
648x488 at 76 FPS
|
|
FL3-FW-14S3C-C
|
|
FL3-FW-14S3M-C
|
|
|
1.4 MP
|
-
Sony ICX267 CCD, 1/1", 4.65 μm
-
Global Shutter
-
1384x1032 at 16 FPS
|
|
FL3-FW-20S4C-C
|
|
FL3-FW-20S4M-C
|
|
|
2.0 MP
|
-
Sony ICX274 CCD, 1/1.8", 4.4 μm
-
Global Shutter
-
1624x1224 at 15 FPS
|
|
A/D Converter
|
12-bit
|
|
Video Data Output
|
8, 12, 16 and 24-bit digital data
|
|
Image Data Formats
|
Y8, Y16 (all models) RGB, YUV411, YUV422, Raw8, Raw16 (color
models)
|
|
Partial Image Modes
|
Pixel binning and region of interest (ROI) modes
|
|
Image Processing
|
Gamma, lookup table, hue, saturation, and sharpness
|
|
Gain
|
Automatic/Manual/One-Push Gain modes
|
|
0 dB to 24 dB
|
|
Gamma
|
0.50 to 4.00
|
|
White Balance
|
Automatic/manual modes, programmable via software
|
|
High Dynamic Range
|
Cycle 4 gain and exposure presets
|
|
Color Processing
|
On-camera in YUV or RGB format, or on-PC in Raw format
|
|
Digital Interface
|
IEEE 1394b interface with screw locks for camera control, data, and
power
|
|
Transfer Rates
|
100, 200, 400, 800 Mbit/s
|
|
GPIO
|
8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial
I/O, 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O
pins
|
|
External Trigger Modes
|
IIDC Trigger Modes 0, 1, 3, 4, 5, 14, 15
|
|
Synchronization
|
Via external trigger or software trigger
|
|
Shutter
|
Global Shutter
|
|
Automatic/Manual/One-Push/Extended Shutter modes
|
|
0.03 ms to >25 seconds (extended shutter mode)
|
|
Image Buffer
|
32 MB frame buffer
|
|
Memory Channels
|
2 memory channels for custom camera settings
|
|
Flash Memory
|
1 MB
|
|
Dimensions
|
29x29x30 mm excluding lens holder and connectors (metal case)
|
|
Mass
|
58 g (without optics or tripod mounting bracket)
|
|
Power Consumption
|
8-30 V, <2.5 W, via GPIO or 1394b interface
|
|
Camera Specification
|
IIDC v1.32
|
|
Camera Control
|
via FlyCapture SDK, CSRs, or third party software
|
|
Camera Updates
|
In-field firmware updates
|
|
Lens Mount
|
C-mount
|
|
Temperature
|
Operating: 0° to 45°C; Storage: -30° to 60°C
|
|
Emissions Compliance
|
CE, FCC, RoHS
|
|
Operating System
|
Vista SP1, Windows 7
|
|
Warranty
|
Two years
|
Development Kit Contents
The following items are included
in the Flea2 / Flea3 / Grasshopper / Grasshopper2 / Grasshopper Express / (1394b
models only) Development Accessory Kit DEVKIT-01-0001:
-
ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
-
ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b
cable
-
ACC-01-1001: IEEE-1394b OHCI PCI Host Adapter 2 Port 800Mbps card
-
ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring
harness
The following items are included in the Flea2 / Flea3 / Grasshopper /
Grasshopper2 / Grasshopper Express / (1394b models only) Development Accessory
Kit DEVKIT-01-0002:
-
ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
-
ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b
cable
-
FWB-PCIE-01: FirePRO low profile single bus IEEE-1394b PCI Express card
-
ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring
harness
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct
the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
|
|
