MODELVERSIONMPIMAGING SENSOR
|
FL3-GE-03S1C-C
|
|
FL3-GE-03S1M-C
|
|
|
0.3 MP
|
-
Sony ICX618 CCD, 1/4", 5.6 μm
-
Global Shutter
-
648x488 at 120 FPS
|
|
FL3-GE-03S2C-C
|
|
FL3-GE-03S2M-C
|
|
|
0.3 MP
|
-
Sony ICX424 CCD, 1/3", 7.4 μm
-
Global Shutter
-
648x488 at 82 FPS
|
|
FL3-GE-08S2C-C
|
|
FL3-GE-08S2M-C
|
|
|
0.8 MP
|
-
Sony ICX204 CCD, 1/3", 4.65 μm
-
Global Shutter
-
1032x776 at 31 FPS
|
FL3-GE-13S2C-C
FL3-GE-13S2C-CS
|
FL3-GE-13S2M-C
FL3-GE-13S2M-CS
|
|
|
1.3 MP
|
-
Sony ICX445 CCD, 1/3", 3.75 μm
-
Global Shutter
-
1288x964 at 31 FPS
|
|
FL3-GE-14S3C-C
|
|
FL3-GE-14S3M-C
|
|
|
1.4 MP
|
-
Sony ICX267 CCD, 1/2", 4.65 μm
-
Global Shutter
-
1384x1032 at 18 FPS
|
|
FL3-GE-20S4C-C
|
|
FL3-GE-20S4M-C
|
|
|
2.0 MP
|
-
Sony ICX274 CCD, 1/1.8", 4.4 μm
-
Global Shutter
-
1624x1224 at 15 FPS
|
|
FL3-GE-28S4C-C
|
|
FL3-GE-28S4M-C
|
|
|
2.8 MP
|
-
Sony ICX687 CCD, 1/1.8", 3.69 μm
-
Global Shutter
-
1928x1448 at 14 FPS
|
|
FL3-GE-50S5C-C
|
|
FL3-GE-50S5M-C
|
|
|
5.0 MP
|
-
Sony ICX655 CCD, 2/3", 3.45 μm
-
Global Shutter
-
2448x2048 at 8 FPS
|
|
A/D Converter
|
12-bit
|
|
Video Data Output
|
8, 12, 16 and 24-bit digital data
|
|
Image Data Formats
|
Y8, Y16, Mono8, Mono12, Mono16 (all models) RGB, YUV411, YUV422, YUV 444,
Raw8, Raw12, Raw16 (color models)
|
|
Partial Image Modes
|
Pixel binning and region of interest (ROI) modes
|
|
Image Processing
|
Gamma, lookup table, hue, saturation, and sharpness
|
|
Gain
|
Automatic/Manual/One-Push Gain modes
|
|
0 dB to 24 dB
|
|
Gamma
|
0.50 to 4.00
|
|
White Balance
|
Automatic/manual modes, programmable via software
|
|
High Dynamic Range
|
Cycle 4 gain and exposure presets
|
|
Color Processing
|
On-camera in YUV or RGB format, or on-PC in Raw format
|
|
Digital Interface
|
Gigabit Ethernet interface with screw locks for camera control and
data
|
|
Transfer Rates
|
10/100/1000 Mbit/s
|
|
GPIO
|
8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial
I/O, 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O
pins
|
|
External Trigger Modes
|
IIDC Trigger Modes 0, 1, 3, 4, 5, 13 (FL3-GE-13S2 only), 14 and 15
|
|
Synchronization
|
Via external trigger or software trigger
|
|
Shutter
|
Global Shutter
|
|
Automatic/Manual/One-Push/Extended Shutter modes
|
|
0.03 ms to 32 seconds (extended shutter mode)
|
|
Image Buffer
|
32 MB frame buffer
|
|
Memory Channels
|
2 memory channels for custom camera settings
|
|
Flash Memory
|
1 MB
|
|
Dimensions
|
29 mm x 29 mm x 30 mm excluding lens holder, without optics (metal
case)
|
|
Mass
|
38 grams (without optics)
|
|
Power Consumption
|
12-24 V, <2.5 W, via GPIO
|
|
Camera Specification
|
GigE Vision v1.2
|
|
Camera Control
|
via FlyCapture SDK, CSRs, or third party software
|
|
Camera Updates
|
In-field firmware updates
|
|
Lens Mount
|
C-mount (FL3-GE-13S2 also available with CS-mount)
|
|
Temperature
|
Operating: 0° to 45°C; Storage: -30° to 60°C
|
|
Emissions Compliance
|
CE, FCC, RoHS
|
|
Operating System
|
Windows 7, Linux Ubuntu
|
|
Warranty
|
3 years
|
Development Kit Contents
The Flea3 GigE does not offer a
Development Kit
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct
the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
|
