MODELVERSIONMPIMAGING SENSOR
|
|
0.3 MP
|
-
Sony ICX424 CCD, 1/3", 7.4 μm
-
Global Shutter
-
648x488 at 80 FPS
|
|
|
0.8 MP
|
-
Sony ICX204 CCD, 1/3", 4.65 μm
-
Global Shutter
-
1032x776 at 30 FPS
|
FL2G-13S2C-C
|
FL2G-13S2M-C
|
|
|
1.3 MP
|
-
Sony ICX445 CCD, 1/3", 3.75 μm
-
Global Shutter
-
1288x964 at 30 FPS
|
|
|
1.4 MP
|
-
Sony ICX267 CCD, 1/2", 4.65 μm
-
Global Shutter
-
1384x1032 at 15 FPS
|
|
|
2.0 MP
|
-
Sony ICX274 CCD, 1/1.8", 4.4 μm
-
Global Shutter
-
1624x1224 at 15 FPS
|
FL2G-50S5C-C
|
FL2G-50S5M-C
|
|
|
5.0 MP
|
-
Sony ICX655 CCD, 2/3", 3.45 μm
-
Global Shutter
-
2448x2048 at 7.5 FPS
|
A/D Converter
|
12-bit
|
Video Data Output
|
8, 12, 16 and 24-bit digital data
|
Image Data Formats
|
Y8, Y16 (all models) RGB, YUV411, YUV422, YUV444, Raw8, Raw16 (color
models)
|
Partial Image Modes
|
Pixel binning and region of interest (ROI) modes
|
Image Processing
|
Gamma, lookup table, hue, saturation, and sharpness
|
Gain
|
Automatic/Manual/One-Push Gain modes
|
0 dB to 24 dB
|
Gamma
|
0.50 to 4.00
|
White Balance
|
Automatic/manual/one push modes, programmable via software
|
Color Processing
|
On-camera in YUV or RGB format, or on-PC in Raw format
|
Digital Interface
|
Bilingual 9-pin IEEE 1394b interface for camera control, data, and
power
|
Transfer Rates
|
100, 200, 400, 800 Mbit/s
|
GPIO
|
8-pin Hirose HR25 GPIO connector opto-isolated pins for trigger and strobe
(FL2G only), bi-directional pins for trigger, strobe or serial port
|
External Trigger Modes
|
IIDC Trigger Modes 0, 1, 3, 4, and 5 (03S2 and 08S2), 14, and 15
|
Synchronization
|
Via external trigger, software trigger (on same bus), or free
running
|
Shutter
|
Global Shutter
|
Automatic/Manual/One-Push/Extended Shutter modes
|
0.02 ms to greater than 10 s (extended shutter mode)
|
Image Buffer
|
32 MB Frame Buffer (FL2G only)
|
Memory Channels
|
3 memory channels for custom camera settings
|
Flash Memory
|
512 KB (FL2G only)
|
Dimensions
|
29 mm x 29 mm x 30 mm excluding lens holder, without optics (metal
case)
|
Mass
|
58 grams (without optics)
|
Power Consumption
|
8-30V, <2.5W, via GPIO or 1394b interface
|
Camera Specification
|
IIDC v1.31, compatible with IEEE-1394b and IEEE-1394a interfaces
|
Camera Control
|
via FlyCapture SDK, CSRs, or third party software
|
Camera Updates
|
In-field firmware updates
|
Lens Mount
|
C-mount
|
Temperature
|
Operating: 0° to 45°C; Storage: -30° to 60°C
|
Emissions Compliance
|
CE, FCC, RoHS
|
Operating System
|
Vista SP1, Windows 7
|
Warranty
|
Three years
|
Development Kit Contents
The following items are included
in the Flea2 / Flea3 / Grasshopper / Grasshopper2 / Grasshopper Express / (1394b
models only) Development Accessory Kit DEVKIT-01-0001:
-
ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
-
ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b
cable
-
ACC-01-1001: IEEE-1394b OHCI PCI Host Adapter 2 Port 800Mbps card
-
ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring
harness
The following items are included in the Flea2 / Flea3 / Grasshopper /
Grasshopper2 / Grasshopper Express / (1394b models only) Development Accessory
Kit DEVKIT-01-0002:
-
ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
-
ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b
cable
-
FWB-PCIE-01: FirePRO low profile single bus IEEE-1394b PCI Express card
-
ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring
harness
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct
the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
The Blackfly camera line combines Power over
Ethernet, highly sensitive sensors, industry-leading affordability and a host of
unique features for uncompromising value. Every Blackfly model comes packed with
functionality designed to maximize performance and reliability, including a 16
MByte frame buffer; LED status indicators; and an on-camera image processing
pipeline that provides color interpolation, gamma, and lookup table
functionality. The Blackfly camera weighs just 36 grams, measures 29x29x30mm and
uses 2 watts of power.
|
MODELVERSIONMPIMAGING SENSOR
BFLY-PGE-05S2C-CS
|
BFLY-PGE-05S2M-CS
|
|
|
0.5 MP
|
-
Sony ICX693 CCD, 1/3", 6.0 μm
-
Global shutter
-
808 x 608 at 50 FPS
|
BFLY-PGE-09S2C-CS
|
BFLY-PGE-09S2M-CS
|
|
|
0.9 MP
|
-
Sony ICX692 CCD, 1/3", 4.08 μm
-
Global shutter
-
1288 x 728 at 30 FPS
|
BFLY-PGE-13S2C-CS
|
BFLY-PGE-13S2M-CS
|
|
|
1.3 MP
|
-
Sony ICX445 CCD, 1/3", 3.75 μm
-
Global shutter
-
1288 x 964 at 22 FPS
|
BFLY-PGE-13E4C-CS
|
BFLY-PGE-13E4M-CS
|
|
|
1.3 MP
|
-
e2v EV76C560 CMOS, 1/1.8", 5.3 μm
-
Global shutter
-
1280 x 1024 at 60 FPS
|
|
|
1.4 MP
|
-
Sony IMX104 CMOS, 1/3", 3.75 μm
-
Rolling shutter
-
1296 x 1032 at 60 FPS
|
|
|
2.3 MP
|
-
Sony IMX136 CMOS, 1/2.8", 2.8 μm
-
Rolling shutter
-
1920 x 1200 at 27 FPS
|
Imaging Performance
(EMVA 1288)
|
See theImaging Performance Specification, which includes quantum
efficiency, saturation capacity (full well depth), read noise, dynamic range and
signal to noise ratio.
|
A/D Converter
|
10-bit (BFLY-PGE-13E4)/12-bit
|
Video Data Output
|
8, 12, 16 and 24-bit digital data
|
Image Data Formats
|
Mono8, Mono12, Mono16, Raw8, Raw12, Raw16 (all models); RGB, YUV411, YUV422,
YUV 444 (color models)
|
Partial Image Modes
|
Pixel binning, decimation, and region of interest (ROI) modes
|
Image Processing
|
Gamma, lookup table, hue, saturation, and sharpness
|
Shutter
|
Global shutter; Rolling shutter (BFLY-PGE-14S2/BFLY-PGE-23S2);
Automatic*/manual/one-push* (*free running only for CMOS)
0.038 ms to 3
seconds (BFLY-PGE-05S2); 0.1 ms to 3 seconds (BFLY-PGE-09S2); 0.015 ms to 1
second (BFLY-PGE-13E4)
|
Gain
|
Automatic*/manual/one-push* (*free running only for CMOS)
0 dB to 24 dB
(BFLY-PGE-05S2); -4.5 dB to 24 dB (BFLY-PGE-09S2); 0 dB to 18 dB
(BFLY-PGE-13E4)
|
Gamma
|
0.50 to 3.99, programmable lookup table
|
White Balance
|
Automatic*/manual/one-push* (*free running only for CMOS)
|
Color Processing
|
On-camera in YUV or RGB format, or on-PC in Raw format
|
Digital Interface
|
Gigabit Ethernet interface with screw locks for camera control and data;
Power over Ethernet
|
Transfer Rates
|
10/100/1000 Mbit/s
|
GPIO
|
6-pin Hirose HR10A-7R-6PB GPIO connector for trigger, strobe, and
power
|
External Trigger Modes
|
Standard, low smear (BFLY-PGE-05S2, BFLY-PGE-09S2), overlapped
(BFLY-PGE-05S2, BFLY-PGE-09S2), multi shot
|
Synchronization
|
Via external trigger or software trigger
|
Image Buffer
|
16 MB frame buffer
|
Memory Channels
|
2 user configuration sets for custom camera settings
|
Flash Memory
|
512 KB non-volatile memory
|
Dimensions
|
29 mm x 29 mm x 30 mm excluding lens holder, without optics (metal
case)
|
Mass
|
36 grams (without optics)
|
Power Consumption
|
Power over Ethernet (PoE); or 12 V nominal (5 - 16 V) via GPIO interface,
maximum 2.5 W (2 W BFLY-PGE-13E4)
|
Machine Vision Standard
|
GigE Vision v1.2
|
Camera Control
|
Via FlyCapture SDK or GigE Vision third party software
|
Camera Updates
|
In-field firmware updates
|
Lens Mount
|
CS-mount (5 mm C-mount adapter not included)
|
Temperature
|
Operating: 0° to 45°C; Storage: -30° to 60°C
|
Compliance
|
CE, FCC, RoHS
|
Operating System
|
Windows, Linux (32- and 64-bit)
|
Warranty
|
3 years
|
Development Kit Contents
The Blackfly does not offer a
Development Kit
Available Accessories (Sold
Separately)
ACC-01-0003Tripod mount
adapter
ACC-01-5004C to CS-mount adapter
ACC-01-1100Intel
PRO 1000 CT Gigabit Ethernet PCI Express x1 Interface
Card
ACC-01-901112V 1.5A Wall-Mount Power Supply, Plug Adapters, HR10
GPIO Wiring Harness
ACC-01-901219.6W Single Port Power over Ethernet
Injector with NA power cord
ACC-01-2100 5.0 meter, CAT 5e Locking
Cable, High Flex
ACC-01-30091.0-meter, Circular 6-pin pre-wired GPIO
Hirose Connector
ACC-01-30104.5-meter, Circular 6-pin pre-wired GPIO
Hirose Connector
ACC-01-30116-pin Circular Hirose HR10 GPIO
Connector
|
|