Flare 4K SDI：
SPECIFICATIONS
Camera Model
Flare 4KSDI
Output Modes
UHD or DCI 4K up to 60 fps
Optical Format
Super 35mm / APS-C (4K: 25.5mm diagonal, UHD: 24.2mm diagonal)
Sensor Type
CMOS w. global electronic shutter
Sensor Options
Color (Bayer) or Near IR enhanced monochrome
Dynamic Range
60 dB (10 Stops)
Output Interface
Quad-Link HD-SDI, Dual-Link 3G-SDI or Quad-Link 3G-SDI
Output Format
10-bit 4:2:2(Y’Cb’Cr’), 4:4:4 (RGB) or RAW (Bayer)
Exposure Control
Automatic (AEC) or manually adjustable
Luma Control
Gamma, master pedestal, white clipping offset with adjustable knee function
Color Control
Color matrix, RGB offsets, saturation adjustment, Preset/Auto/Tracking White Balance
Synchronization
Tri-level sync input (BNC)
Camera Configuration
RS-485, use handheld remote for OSD or use PC software, cables up to 1000 ft
Flare 4M140-CX：
SPECIFICATIONS
Camera Model
Flare 4MP
Sensor Size (H x V)
2048 x 2048
Frame Rate (full resolution)
CX: 140 fps (8-bit), 112 fps (10-bit)
CL: 179 fps (8-bit), 149 fps (10-bit)
Optical Format
1" (15.9mm diagonal)
Sensor Type
CMOS w. global electronic shutter
Sensor Options
Monochrome, color (Bayer) or NIR-enhanced monochrome
Pixel Size
5.5 x 5.5μm
Dynamic Range / Sensitivity
60 dB, 4.64 V/lux.s
Output Configurations
CX: 1 or 2 links at 3.125Gbps (CXP-3)
CL: Base, Medium, Full, Full 80-bit (80MHz Pixel Clock)
Pixel Bit Depth
8-bit or 10-bit
Exposure Control
Trigger width, timed, or auto-exposure control
Image Correction
Black level, row and column-based FPN/PRNU correction, bad pixel replacement
Color Processing
Auto white balance (tracking or manual), programmable LUTs
Camera Configuration
GenICam (CX), ASCII commands (CL), or Flare Control software