商鋪名稱：臨沂天億焊接材料有限公司
聯系人：張先生（）
聯系手機：
固定電話：
企業郵箱：jinxinht1888@163.com
聯系地址：山東臨沂市河?xùn)|經濟開發區7188號
郵編：276000
聯系我時，請說是在焊材網上看到的，謝謝！
|
Category類 別 |
Trade-mark牌 號 |
Chemicalcomposition化學成份(%) |
Hardness硬 度 |
Application用 途
|
|
Oxy- Acetylene Flame spray- using 氧
乙
炔
焰
噴
焊 |
F103 |
Cr10 B1.5 Si3 Ni Rem. |
HRc 25 |
Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide. 鑄鐵件的噴焊，如玻璃模具，汽缸、導軌 |
|
F101 |
Cr10 B2.5 Si3 Ni Rem. |
HRc 45 |
Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump. 耐磨、耐蝕件的噴焊，如閥門、泵轉子、泵柱塞 |
|
|
F101Fe |
Cr10 B2.5 Si3 Fe10 Ni Rem. |
HRc 45 |
Spray-fusing of corrosion-resistant parts, such as axle and stigma. 耐磨件的噴焊，如軸類、汽門 |
|
|
F102 |
Cr16 B4 Si4 Ni Rem. |
HRc 60 |
Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston. 耐磨、耐蝕、抗高溫氧化工件的噴焊，如模具、柱塞 |
|
|
F102Fe |
Cr16 B4 Si4 Fe15 Ni Rem. |
HRc 60 |
Spray-fusing of corrosion-resistant parts, such as axle and cold die. 耐磨件的噴焊，如軸類、冷模具 |
|
|
F105 |
F102+50%WC |
HRc 60 |
Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan. 抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片 |
|
|
F105Fe |
F102Fe+35%WC |
HRc 60 |
Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan. 抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片 |
|
|
F108 |
F102+80%WC |
HRc 60 |
Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger. 抗強烈磨粒磨損，無需加工場合的噴焊，如挖泥船耙齒 |
|
|
F301 |
Cr5 B4 Si4 Ni30 Fe Rem. |
HRc 45 |
Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree. 農機,礦山機械易損件的噴焊，如齒輪，車軸 |
|
|
Track iron powder 軌鐵粉 |
Cr5 B1.5 Si3 Ni30 Fe Rem. |
HRc 28 |
Repair spray-fusing of defects such as scratch and concavity of railroad track. 鐵路鋼軌擦傷、低塌等缺陷的修復噴焊 |
|
|
Oxy-acetylene flame spraying
氧 乙 炔 焰 噴 涂 |
F111 |
Cr5 B1.5 Si3 Ni30 Fe Rem. |
HB 150 |
Spraying of bearing and cutting parts etc. 軸承、切削件等的噴涂 |
|
F113 |
Cr10 B1.5 Si3 Ni Rem. |
HB 250 |
Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance. 噴涂亦可噴焊，如滾筒、柱塞、耐蝕耐磨軸等 |
|
|
F313 |
Cr15 B1.5 Fe Rem. |
HB 250 |
Spraying of dryer of papermaking and axle. 造紙烘缸、軸類的噴涂 |
|
|
F314 |
Cr18 Ni9 B1.5 Fe Rem. |
HB 250 |
Spraying of axle. 軸類噴涂 |
|
|
F412 |
Sn10 P0.3 Cu Rem. |
HB 80 |
Spraying of axle and bearing. 軸、軸承的噴涂 |
|
|
F512 |
復合Al5Ni95 |
|
Backing spray of transition layer between base and working layer. 噴涂層的基體與工作層之間過渡（打底）層用噴涂 |
|
|
PTA hardfacing 等 離 子 弧 噴 焊 |
F221 |
Cr26 W5 B0.7 Co Rem. |
HRc 43 |
PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool. 高溫高壓閥門密封面、熱剪切刃口的等離子噴焊 |
|
F223 |
Cr21 W5 B1.5 Co Rem. |
HRc 40 |
PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower. 高溫下耐磨耐蝕件的噴焊，如高溫高壓閥門、鼓風機 |
|
|
F321 |
Cr13 B1.5 Si1 Fe Rem. |
HRc 45 |
PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc. 中溫中壓閥門的閘板及其他耐磨件的等離子噴焊 |
|
|
F322 |
Cr23 Ni13 Si5 B1 Fe Rem. |
HRc 40 |
PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc. 中溫中壓閥門的閥座及其他耐磨件的等離子噴焊 |
|
|
F422 |
Sn10 P0.3 Cu Rem. |
HB 80 |
PTA hardfacing of axle and bearing etc. 軸、軸承等離子噴焊 |
