商鋪名稱：濟南銀箭焊接材料有限公司
聯系人：馬經理（先生）
聯系手機：
固定電話：
企業郵箱：mingquanhc@163.com
聯系地址：山東省濟南市歷下區五金市場8號
郵編：250002
聯系我時，請說是在焊材網上看到的，謝謝！
|
ENiCrMo-3, a high nickel electrode,is used for welding nickel-chromium-molybdenum alloys |
||||||
| to themselves and to steel. It is also suitable for welding 5 percent and 9 percent nickel steels | ||||||
| for low temperature service to themselves as well as to low alloys or stainless steel. |
| ENiCrMo-3 has moderate strength, good fabricability and exception corrosion resistance from | ||||||
| cryogenic to elevated (up to 1800°F). This electrode resists corrosive attack and is virtually | ||||||
| immune to chloride-ion stress-corrosion cracking. | ||||||
| CLASSIFICATIONS: | ||||||
| ENiCrMo-3 | ||||||
| AWS A5.11 | ||||||
| ASME SFA 5.11 | ||||||
| UNS W86112 | ||||||
| APPROVALS: | ||||||
| MIL-E-22200/3 | ||||||
| APPLICATIONS: | ||||||
| ENiCrMo-3 is used to join NICRMO alloys such as 625, 800, 801 and 600.It is utilized for | ||||||
| welding piping systems and reactor components in the power generation industry and for | ||||||
| high temperature service in an array of other engineering applications including | ||||||
| petrochemical plants and furnace equipment.This versatile wire is excellent for overlaying on | ||||||
| steel where exceptionalcorrosion resistance is required,such as chloride contaminated | ||||||
| cooling water in heat exchangers,as well as offshore and marine environments. | ||||||
| DIAMETERS: | ||||||
| 3/32'',1/8'', | ||||||
| 5/32'',3/16'' | ||||||
| TYPICAL | ||||||
| MECHANICAL PROPERTIES: | ||||||
| Tensile Strength (psi) 11,200 | ||||||
| Percent Elongation 35 | ||||||
| TYPICAL | ||||||
| CHEMICAL COMPOSITION: | ||||||
| C | Mn | P | S | Si | Ni | |
| 0.03 | 0.27 | 0.01 | 0.01 | 0.49 | 64.20 | |
| Cr | Mo | Cu | ||||
| 21.30 | 8.40 | 0.07 | ||||
|
ECuNi is designed for the shielded metal arc welding of wrought or cast 70/30,80/20 and |
||||||
| 90/10 copper-nickel alloys to themselves or to each other.It is also utilized to weld the clad | ||||||
| side of copper-nickel clad steel. |
| CLASSIFICATIONS: | ||||||
| ECuNi | ||||||
| AWS A5.6 | ||||||
| ASME SFA 5.6 | ||||||
| UNS W60715 | ||||||
| APPROVALS: | ||||||
| MIL-E22200/4D | ||||||
| APPLICATIONS: | ||||||
| Due to its superb resistance to corrosion in sea water, ECuNi is used for welding |
| desalination plants,offshore construction and marine environments. |
| DIAMETERS: | ||||||
| 3/32'',1/8'', | ||||||
| 5/32'',3/16'' | ||||||
| TYPICAL | ||||||
| MECHANICAL PROPERTIES: | ||||||
| Tensile Strength (psi) 53,000 | ||||||
| Percent Elongation 25 | ||||||
| TYPICAL | ||||||
| CHEMICAL COMPOSITION: | ||||||
| Mn | P | S | Si | Ni+Co | ||
| 1.56 | 0.01 | 0.005 | 0.25 | 30.70 | ||
| Cu+Ag | Fe | Sn | Pb | Ti | ||
| Remain | 0.63 | 0.002 | 0.002 | 0.010 | ||
| Zn | ||||||
| 0.001 | ||||||
