商鋪名稱：濟南銀箭焊接材料有限公司
聯系人：馬經理（先生）
聯系手機：
固定電話：
企業郵箱：mingquanhc@163.com
聯系地址：山東省濟南市歷下區五金市場8號
郵編：250002
聯系我時，請說是在焊材網上看到的，謝謝！
上海司太立D 812鈷基焊條
Category
Trade-
Equivalent to China Standard
Characteristics & application
Equivalent to AWS
Hard-surfacing
硬
面
堆
焊
D 667
EDZCr-B-15
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
D 802
EDCoCr-A-03
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
ECoCr-A
D 812
EDCoCr-B-03
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
ECoCr-B
D 822
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
D 832
EDCoCr-C-03
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
ECoCr-C
D 842
EDCoCr-D-03
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
Cast iron
鑄
鐵
Z 308
EZNi
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
ENi-Cl
Z 408
EZNiFe
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
ENiFe-Cl
Z 508
EZNiCu-1
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
ENiCu-B
Copper alloys
銅
合
金
Cu 107
ECu
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
ECu
Cu 207
ECuSi
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
ECuSi
Cu 227
ECuSnB
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
ECuSn-C
Cu 237
ECuAl
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
ECuAl-A2
Aluminum alloys
鋁
合
金
Al 109
TAl
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
E1100
Al 209
TAlSi
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
E4043
Al 309
TAMn
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
E3003
Nickel alloys
鎳合金
Ni 102
ENi-1
Pure nickel. Welding and surfacing of nickel and nickel to steel.
ENi-1
Ni 207
ENiCu-7
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
ENiCu-7
類 別
Mark
牌 號
相當國標
特性和用途
相當AWS
HRc≥48，耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件
HRc38-47，耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃
HRc45-50，耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥
HRc≥53，耐熱、耐磨，但抗沖擊性差。堆焊鍋爐旋轉葉輪
HRc≥50，耐熱、耐磨。堆焊高溫工件如熱軋導軌
HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。堆焊熱鍛模
純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛
鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋
鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊
紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排
硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用
錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用
鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或堆焊用
純鋁，耐蝕性好，但強度不高，純鋁焊接用
鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金
鋁錳，強度高，耐蝕。鋁合金焊接用
純鎳，用于鎳、鎳與鋼的焊接與堆焊
鎳銅，用于鎳銅、鎳銅與鋼的焊接與堆焊
