25%銀焊條斯米克廣西哪里有賣斯米克HL302銀焊條25%促銷價格YG301 BAg10CuZn(HL301) 9-11 52-54 余量 815-850 451 價格便宜，但釬焊溫度較高，接頭塑性較差，適宜于釬焊要求較低的銅合金，鋼等 QCu15Ag BAg15CuZn 14-16 46-48 余量 787-808 YG302 BAg25CuZn(HL302) 24-26 40-42 余量 700-800 353 釬焊溫度稍高，潤濕性及填縫能力好，適宜于釬焊銅合金，鋼等25%銀焊條斯米克廣西哪里有賣25%銀焊條 BAg25CuZnCd BAg-33 607-682 含鎘銀釬料較無隔銀釬料熔點相對較低，可用于分級釬焊，對于釬焊鋼及不銹鋼．硬質合金時工藝性能均好于無鎘銀釬料。主要用于釬焊銅及銅合金．鋼及不銹鋼．硬質合金等。 主要生產：碳化鎢合金耐磨焊條,合金堆焊焊條,鈷基焊條，鈷基焊絲，銀焊條,純鎳Z308鑄鐵焊條,鑄鐵氣焊條,高溫耐磨焊條,抗沖擊耐磨焊條,可加工耐磨焊條,模具焊條,閥門焊條,鈷基1號,高錳鋼堆焊條,不銹鋼焊條,耐熱鋼焊條,銅及銅合金焊條,鑄造碳化鎢氣焊條;鎳基焊條等特種焊材。焊性和耐腐蝕性，很高的導熱和導電性能以及極好的加工性能，但強度較低。 用途：用作純鋁的氬弧焊及填充材料，廣泛應用于電解鋁廠鋁母線和導桿的連接以及電力、化學、食品等行業。我公司新研制具有先進水平的鋁材之間釬焊的無縫藥芯釬料。目前市場用量非常大，也是司主打產品之一,可根據客戶需求制成條狀、環狀以方便使用。其焊接效果與韓國法國等進口焊絲幾無相差，但價格要便宜一半，釬焊鋁制產品的朋友歡迎您試用該產品。
|
S 213 |
Sn8 Cu Rem. |
Wear resistance. Argon arc welding of copper alloys and surfacing of
steel. |
|
S 214 |
Al7.5 Cu Rem. |
Wear and corrosion resistance. Argon arc welding of copper alloys and
surfacing of steel. |
|
S 215 |
Al9 Cu Rem. |
Wear and corrosion resistance. Argon arc welding of copper alloys and
surfacing of steel. |
|
S 221 |
Cu60 Sn1 Si0.3 |
Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of
copper, steel and cast iron. |
|
S 221F |
Cu60 Sn1 Si 0.3 |
S221 welding rod coated with flux. |
|
S 222 |
Cu58Sn0.9Si0.1 |
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of
copper, steel and cast iron. |
|
S 222F |
Cu58Sn0.9Si0.1 |
S222 welding rod coated with flux. |
|
S 223 |
Cu59 Sn0.6 |
Melting point is about 900℃. Braze welding of copper, steel and cast iron. |
|
S 224 |
Cu62 Si0.5 |
Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of
copper, steel and cast iron. |
|
S 225 |
Cu48 Ni10 |
Melting point is about 935℃ and
high strength. Braze welding of steel, nickel and carbide alloys. |
|
S 225F |
Cu48 Ni10 |
S225 welding rod coated with flux. |
|
S 226 |
Cu60 Sn0.3 |
Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast
iron. |
|
S 227 |
Cu58Sn0.9Ni0.5 |
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of
copper, steel and cast iron. |
|
S 229 |
Cu55 Ni6 Mn4 |
Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide. |